Operation instruction - Asennustuotteet
Operation instruction - Asennustuotteet
Operation instruction - Asennustuotteet
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ABB i-bus ® KNXCommissioning3.2.8.1.1 ParameterDistinction betweenshort and longoperation – noIf the option no is selected with the parameter Distinction between short andlong operation, the following parameters in the parameter windowA: Switch sensor, page 53, are visible.Opening the contacts => Event 0Closing the contacts => Event 1< NOTEActivate minimum signal timeOptions: noyes• yes: The following parameters appear:On closing the contactin value x 0.1 s [0…65,535]Options: 1…10…65.535On opening the contactin value x 0.1 s [0…65,535]Options: 1…10…65.535© 2011 ABB STOTZ-KONTAKT GmbH 56