Operation instruction - Asennustuotteet

ABB i-bus ® KNXCommissioningLong operation after …Options: 0.3/0.4/0.5/0.6/0.8/1/1.2/1.5/2/3/4/5/6/7/8/9/10 sHere the time period T L , after which an actuation is considered a “long”operation, is defined.On short operation: switchOptions: ONOFFTOGGLEno reactionThis parameter defines if the communication object Telegram switchTOGGLEs with short operation (typical: 1 button dimming) or only switchesOFF or ON (typically: 2 button dimming).• TOGGLE: A short operation changes the value of the communicationobject Telegram switch.• ON: On short operation the value 1 is sent.• OFF: On short operation the value 0 is sent.On long operation: dimming directionOptions: BRIGHTERDARKERalternatingalternating, BRIGHTER after switching ONalternating, DARKER after switching ON:With this parameter, you set what the communication object Dimming shouldsend on the bus with a long operation.A long operation changes the value of the communication object TelegramDimming.With 1 button dimming the parameter alternating should be set for Dimminghere. In this case, the dimming telegram, which is diametrically opposed tothe last dimming telegram, is sent.• BRIGHTER: The communication object sends a BRIGHTER telegram.• DARKER: The communication object sends a DARKER telegram.• alternating: The communication object alternately sends a BRIGHTERand a DARKER telegram.• alternating, BRIGHTER after switching ON The communication object atthe first time sends a BRIGHTER telegram after an ON telegram;thereafter, it alternately sends BRIGHTER and DARKER telegrams.• alternating, DARKER after switching ON: The communication object atthe first time sends a DARKER telegram after an ON telegram,thereafter, it alternately sends BRIGHTER and DARKER telegrams.NoteIf the option Only dimming is selected in the Function Dimming, only theparameter On operation: dimming direction is visible.© 2011 ABB STOTZ-KONTAKT GmbH 72