1.0 - SATA-IO

More documents

Recommendations

Info

Microsoft and Windows XP are either registered trademarks or trademarks of MicrosoftCorporation.All other trademarks and registered trademarks are property of their respective owners.THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THISMANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL INFORMATION,EXAMPLES AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BEACCURATE BUT ARE REPRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESSOR IMPLIED. USERS ARE FULLY RESPONSIBLE FOR THEIR APPLICATION OF ANYPRODUCTS.THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYINGPRODUCT ARE SET FORTH IN INFORMATION THAT SHIPPED WITH THE PRODUCTAND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TOLOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT LECROY FORA COPY.Copyright © 2003-2009, LeCroy CorporationAll rights reserved.www.lecroy.comLeCroy Corporation3385 Scott BlvdSanta Clara, CA 95054(408) 727-6600Contact information for this MOI:psgsupport@lecroy.comSerial ATA Interoperability Programii Device Digital MOI for LeCroy STX Bus Analyzer
Page 1: 19 March 2009 Version 1.00Serial AT
Page 5 and 6: RECORD of CHANGESRevision Date Comm
Page 7 and 8: • Specified UDMA Mode 0 inGTR-03,
Page 9 and 10: match tests with 2STANDBY-IMMEDIATE
Page 11 and 12: ACKNOWLEDGMENTSThe SATA-IO would li
Page 13 and 14: 4. BLANK: means a severe error is h
Page 15 and 16: ASR-01 COMINIT Response IntervalPur
Page 17 and 18: ASR-02 COMINIT OOB IntervalPurposeT
Page 19 and 20: GTR-01 - Software ResetPurposeTo ve
Page 21 and 22: GTR-02 - 3Gbs/s Backward Compatibil
Page 23 and 24: GTR-03 DMA Protocol SupportPurposeT
Page 25 and 26: • Post process:o All issued Comma
Page 27 and 28: Possible ProblemsIt is advisable to
Page 29 and 30: Observable Results1. Click the “V
Page 31 and 32: Observable Results1. Click the “V
Page 33 and 34: o If all above criteria is fulfille
Page 35 and 36: 2) An IDENTIFY DEVICE command is is
Page 39 and 40: 2) An IDENTIFY DEVICE command is is
Page 43 and 44: o Suppression of transmitting the f
Page 45 and 46: • Post process:o Existing and com
Page 47 and 48: 6) A Read Long command is sent to d
Page 51 and 52: • A SECURITY SET PASSWORD is issu
Page 53 and 54:
SSP-04 Set Address MaxPurposeTo ver
Page 55 and 56:
SSP-05 Set Features - Write Cache E
Page 57 and 58:
SSP-06 Set features - Set Transfer
Page 59 and 60:
SSP-07 Set features - Advanced Powe
Page 61 and 62:
SSP-08 Set features - Read Look-Ahe
Page 63 and 64:
SSP-09 Set features -Release Interr
Page 65 and 66:
SSP-10 Set features - Service Inter
Page 67 and 68:
SSP-11 Set Multiple ModePurposeTo v
Page 69 and 70:
IPM-01: Partial State exit latency
Page 71 and 72:
IPM-02: Slumber State exit latency
Page 73 and 74:
IPM-03: Speed matching upon resume
Page 75 and 76:
Observable ResultThe SPD field cont
Page 77 and 78:
o Bit 9 of WORD 76 of Identify Page
Page 79 and 80:
o Acknowledge to PM request is veri
Page 81 and 82:
o Acknowledge to PM request is veri
Page 83 and 84:
o Existing and complete execution o
Page 85 and 86:
6) If no Power management request h
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
1) Power cycle the PUT2) Speed of r
Page 93 and 94:
Appendix ATest SelectionThe Interop
Page 95 and 96:
12. Click the “View” button to
Page 97 and 98:
Host Emulation Page 1 of 1 for manu
show all

1.0 - SATA-IO

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?