1.0 - SATA-IO

• Specified UDMA Mode 0 inGTR-03, also MultiwordDMA from Mode 0 to Mode2• Confirmed receipt of datafrom Log 10h in NCQ-02• Changed test flow in NCQ-04 to verify maximumqueue depth• Identified specific bits thatare being checked for allSSP tests• Changed test flow in SSP-03 to check for SecurityMode and unlock deviceafter test is run• Changed SSP-04 test flowto show both testing 48 andnon-48bit addressing• ClarifiedPASS/FAIL/ERRORresults for IPM tests• Clarified number ofPMNAKs to be seen fromPUT for a PASS/FAIL onIPM-05/06• Changed IPM-08 where aSTANDBY IMMEDIATEwill also be issued to anATAPI drive, previously itwas only for HDDs.• Changed iterations ofIPM-11 from 5 to 100.99D 9/25/2008 • Removed all references toCatalyst Enterprises andchanged to LeCroy• Changed test procedures forSSP-02 as recommended byreview• Changed GTR-02 to remove7 Digital MOI for LeCroy STX Bus Analyzer