978-1-58503-410-9 -- The Fundamentals of SolidWorks 2007

More documents

Recommendations

Info

Quick StartToCopyrightededit a feature, right-click the desired feature in the FeatureManager. Click EditFeature. The PropertyManager is displayed.Display an Isometric view.31. Click IsometricMaterialview from the Reference Triad drop-down list.The Extruded Cut feature removes material from a part. The ExtrudedCut feature is the second feature of the Standoff part. An Extruded Cutextends a profile along a path normal (⊥) to the Sketch plane for somedistance and removes material inside or outside the sketch. The 2D circle issketched on the front face of the Standoff to create a hole.Insert a Sketch.32. ClickCopyrightedthe front face of Extrude1 in the Graphics window. Theselected face in the Graphics window is displayed in green.Extrude1 is highlighted in the FeatureManager.33. Click Sketch from the Control Area. The Sketch toolbar isdisplayed in the CommandManager.Material34. Click Circle from the Sketch toolbar.35. Click the Origin . Click a position to the right of the Origin.The circle is created.Insert a dimension.36. Click Smart Dimension from the Sketch toolbar. Click theCopyrightedcircumference of the circle. The cursor displays the diameterfeedback symbol. Click a position to place the dimension in theGraphics window.37. Enter 3mm in theMaterialModify dialog box. Click the green checkmark from the Modify dialogbox. The circular sketch iscentered at the origin.Insert an Extruded Cut feature.38. Click Features from theControl Area.Copyrighted39. Click Extruded Cutfrom the Features toolbar. TheCut-Extrude PropertyManager isdisplayed.MaterialPage 1 - 15
Quick Start40. Select Through All for End Condition in Direction 1.Copyrighted41. Click OK from the Cut-Extrude PropertyManager.Cut-Extrude1 is displayed in the FeatureManager.Edit the color of the Standoff part.Material42. Click the Standoff icon from the FeatureManager.43. Click Edit Color from the Standard toolbar. The Colorand Optics PropertyManager is displayed.44. Select a color from the Edit Color box as illustrated.45. Click OK from the Color And Optics PropertyManager.Copyrighted47. Double-click the Ø3 dimension.MaterialModify a dimension.46. Double-click the Cut-Extrude1 feature in the FeatureManager.48. Enter 1.00mm in the Modify dialog box.49. Click the green check mark from the Modifydialog box.50. Click Rebuild from the Standard toolbar toupdate the dimensions.51. Press the f key to fit the model to the Graphicswindow.CopyrightedClose the model.52. Click File Close fromthe Main menu.MaterialYou completed theStandoff part using the ExtrudedBase/Boss feature with the MidPlane End Condition option. TheExtruded Cut feature was used tocreate a Through All hole. Youalso applied a color to the partwith the Edit Color tool tocontrol part and feature color andCopyrightedmodified an existing dimension.To edit a sketch, right-clickMaterialthe desired sketch in the FeatureManager. Click Edit Sketch or Edit Sketch Plane.Page 1 - 16
Page 1 and 2: INSIDE:TutorialModel FilesOn CDThe
Page 3 and 4: Quick StartWhat isCopyrightedSolidW
Page 5 and 6: Quick StartThe book was written usi
Page 7 and 8: Quick StartSearchCopyrightedMicroso
Page 9 and 10: Quick StartRight-Click Pop-up menus
Page 11 and 12: Quick StartView ToolbarCopyrightedS
Page 13 and 14: Quick StartSave the Standoff part.C
Page 15: Quick Start23. Click a position to
Page 19 and 20: Quick Start7. Click File Save As f
Page 21 and 22: Quick Start26. Enter 5mm for Distan
Page 23 and 24: Quick Start18. Click OK from the Do
Page 25 and 26: Quick StartYou created the Standoff
Page 27: Quick Start12. Describe the Base fe

978-1-58503-410-9 -- The Fundamentals of SolidWorks 2007

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?