XE-A303 Operation-Manual GB - Sharp

Part1 QUICK START GUIDE Part2 Part3(2) Press the s key to register the setting.On the upper line of the display, guidance messagefor the next step will be displayed.On the lower line of the display, the current settingwill be displayed.sSELECT OF TAX2TAX2NO6. VAT/tax2 status programming (Press s to skip. / Press A to terminate.)(1) Go to (2) when the VAT/tax 2 status does not needto be changed from "TAX2 NO". Otherwise, press: key to display "TAX2 YES".Each time : key is pressed, the display shows"TAX2 YES" and "TAX2 NO" alternately.Default setting is "NO" for dept. code 1 to 10 and 21to 99, and "YES" for dept. code 11 to 20.s(2) Press the s key to register the setting.On the upper line of the display, guidance messagefor the next step will be displayed.On the lower line of the display, the current settingwill be displayed.SELECT OF TAX3TAX3NO7. VAT/tax3 status programming (Press s to skip. / Press A to terminate.)(1) Go to (2) when the VAT/tax 3 status does not needto be changed from "TAX3 NO". Otherwise, press: key to display "TAX3 YES".Each time : key is pressed, the display shows"TAX3 YES" and "TAX3 NO" alternately.Default setting is "NO".(2) Press the s key to register the setting.On the upper line of the display, guidance messagefor the next step will be displayed.On the lower line of the display, the current settingwill be displayed.sSELECT OF TAX4TAX4NO8. VAT/tax4 status programming (Press s to skip. / Press A to terminate.)(1) Go to (2) when the VAT/tax 4 status does not needto be changed from "TAX4 NO". Otherwise, press: key to display "TAX4 YES".Each time : key is pressed, the display shows"TAX4 YES" and "TAX4 NO" alternately.Default setting is "NO".(2) Press the s key to register the setting.On the upper line of the display, guidance messagefor the next step will be displayed.On the lower line of the display, the current settingwill be displayed.sREGIST. TYPE06 NORMAL19