Installation and Maintenance Guide, HiPath ProCenter Agile

More documents

Recommendations

Info

misabout.fmAbout this guideDocumentation feedbackNur für den internen GebrauchA31003-S2265-S100-1-7620, May 20051-4 HiPath ProCenter Agile, Version 6.5 Installation and Maintenance Guide
Nur für den internen Gebrauchmisupgrade.fmUpgrading to the HiPath ProCenter 6.5 releaseUpgrading HiPath ProCenter on a main server machine2 Upgrading to the HiPath ProCenter 6.5 releaseThis chapter provides detailed instructions on how to upgrade existing HiPath ProCenter serverand client software to the HiPath ProCenter 6.5 release.2.1 Upgrading HiPath ProCenter on a main server machineThis section provides detailed instructions on how to upgrade existing HiPath ProCentersoftware on a main server machine.7It is strongly recommended that you back up the existing database before performingan upgrade. Failure to do so may result in the loss of data. For detailed instructions,see Section 6.1, “Backing up the HiPath ProCenter database”, on page 6-1.2.1.1 Upgrading from the HiPath ProCenter 6.0 SMR A releaseThere are two methods by which you can upgrade from the HiPath ProCenter 6.0 SMR Arelease to the HiPath ProCenter 6.5 release.●●Machine-to-machine upgrade - Use this method if you intend to install the HiPathProCenter 6.5 server software on a different machine and want to retain the existing data.In-place upgrade - Use this method if you intend to install the HiPath ProCenter 6.5 serversoftware on the same machine where the data currently resides.>If you are currently using the HiPath ProCenter 6.0 release, you must first upgradeto the 6.0 SMR A release and then follow the instructions in this section.2.1.1.1 Performing a machine-to-machine upgradeTo perform a machine-to-machine upgrade from the 6.0 SMR A release and still retain theexisting data, you must back up and export the existing database and perform a new installationof the HiPath ProCenter 6.5 server software on a new Windows Server 2003 machine.This procedure describes how to export the existing data to text files so they can be importedinto a database on the new server machine during the installation process.To perform a machine-to-machine upgrade:1. Log on to the existing 6.0 SMR A server machine under the Informix account.2. Stop the HiPath ProCenter service on the 6.0 SMR A server machine. Please wait for theservice to completely shut down before proceeding.A31003-S2265-S100-1-7620, May 2005HiPath ProCenter Agile, Version 6.5 Installation and Maintenance Guide 2-1
Page 2: *1PA31003-S2265-S100-1-7620*1P A310
Page 5: Nur für den internen Gebrauchmisab
Page 10 and 11: misupgrade.fmUpgrading to the HiPat
Page 12 and 13: misupgrade.fmUpgrading to the HiPat
Page 14 and 15: mispreserver.fmPreparing to install
Page 20 and 21: misserver.fmInstalling HiPath ProCe
Page 42 and 43: misclient.fmInstalling HiPath ProCe
Page 48 and 49: mismaintenance.fmMaintaining the Hi
Page 58:
HPPCAInstallIX.fmIndexNur für den
show all

Installation and Maintenance Guide, HiPath ProCenter Agile

Create successful ePaper yourself

Delete template?

Save as template?