FCU 2165/2175 Reference Manual - Emerson Process Management

Rosemount Tank Radar REXReference Manual308018EN, Edition 3BSeptember 2007Comms Parameters are the communication parameters (baud rate, parity,data bits, stop bits, FCU Modbus Address) for the device connected to theport, e.g. “4800,N,8,1”. The most common settings are provided when thedriver is selected but these must always be checked to make sure they arecorrect.NOTE!On certain FCU models, some of the ports cannot be edited. In these casesthe Configuration Tools software will not allow you to edit them, e.g. Ethernetand SER4 on FCU 2165.Clicking the OK button will save the configuration of the FCU and close theFCU configuration window. The FCU updates will also be reflected in the treeview.Clicking the Cancel button will ignore any changes and close the FCUconfiguration window.2-16 Section 2. Configuration