Pulse XT 25e Manual - E-flite

Ο 4. Install the battery with two hook and loop straps. Slots are provided onthe floor of the battery compartment for the straps to pass through. The naturalcurl of the straps will allow them to be fed down one slot, under the batterycompartment floor, then up through the opposite slot.Should you find that the rotation direction of your E-flite PowerBrushless Outrunner is opposite to that needed, reversing it is justa matter of switching any two of the motor wires.E-flite’s Power series brushless motors and Pro series controllersare outfitted with red, blue and black power wires. Matching thecolor is not critical to their operation, it only affects the directionof rotation.Ο 5. Install the ESC on the right-hand side of the battery compartment withhook and loop tape. The battery leads, switch leads and throttle leads will betowards the rear of the model. Connect the ESC to the motor.14