Products for Totally Integrated Automation and Micro ... - Siemens

© Siemens AG 2010SIMATIC S7-1200Digital modulesSM 1223 digital input/output module■ Technical specifications (continued)Product type designation SM 1223DI 8x24 V DC,DQ 8x24 V DCNumber of simultaneously controllableinputs6ES7 223-1BH30-0XB0 6ES7 223-1BL30-0XB0 6ES7 223-1PH30-0XB0 6ES7 223-1PL30-0XB0SM 1223DI 16x24 V DC,DQ 16x24 V DCSM 1223DI 8x24 V DC,DQ 8xRelaySM 1223DI 16x24 V DC,DQ 16xRelay• horizontal installation- up to 40 °C, max. 8 16 8 16- up to 50 °C, max. 8 16 8 16• vertical installation- up to 40 °C, max. 8 16 8 16Input characteristic curve acc. to Yes Yes Yes YesIEC 1131, Type 1Input voltage• Rated value, DC 24 V 24 V 24 V 24 V• for signal "0" 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA 5 V DC at 1 mA• for signal "1" 15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mA 15 V DC at 2.5 mAInput current• for signal "0", max.1mA 1mA 1mA 1mA(permissible quiescent current)• for signal "1", min. 2.5 mA 2.5 mA 2.5 mA 2.5 mA• for signal "1", typ. 4 mA; Typical 4 mA; Typical 4 mA; Typical 4 mA; TypicalInput delay (for rated value of inputvoltage)• for standard inputs- parameterizable Yes; 0.2, 0.4, 0.8, 1.6,3.2, 6.4, and 12.8 ms,selectable in groups offourYes; 0.2, 0.4, 0.8, 1.6,3.2, 6.4, and 12.8 ms,selectable in groups offourYes; 0.2, 0.4, 0.8, 1.6,3.2, 6.4, and 12.8 ms,selectable in groups offour• for interrupt inputs- parameterizable Yes Yes Yes YesCable length• Cable length, shielded, max. 500 m 500 m 500 m 500 m• Cable length unshielded, max. 300 m 300 m 300 m 300 mDigital outputsNumber of digital outputs 8 16 8 16• in groups of 1 1 2 4Short-circuit protectionNo;to be provided externallyNo;to be provided externallyNo;to be provided externallyYes; 0.2, 0.4, 0.8, 1.6,3.2, 6.4, and 12.8 ms,selectable in groups offourNo;to be provided externallyLimitation of inductive shutdown voltage L+ (-48 V) L+ (-48 V)toSwitching capacity of the outputs• with resistive load, max. 0.5 A 0.5 A 2A 2A• on lamp load, max. 5W 5W 30 W DC; 200 W AC 30 W DC; 200 W ACOutput voltage• Rated value (AC) 5 to 250 V AC 5 to 250 V AC• Rated value (DC) 24 V 24 V 5 to 30 V DC 5 to 30 V DC• for signal "0" (DC), max. 0.1 V;with 10 kohms Load0.1 V;with 10 kohms Load• for signal "1", min. 20 V DC 20 V DCOutput current• for signal "1" permissible range, max. 0.5 A 0.5 A 2A 2A• for signal "0" residual current, max. 10 µA 10 µAOutput delay with resistive load• 0 to "1", max. 50 µs 50 µs 10 ms 10 ms• 1 to "0", max. 200 µs 200 µs 10 ms 10 ms4Siemens ST 70 N · 20104/53