Aluminum Frame<strong>ODU</strong> <strong>MAC</strong>-S Aluminum FrameStandard versionStift Pin ØØ 5Ø 4Ø 3Ø 2,41Ø 2Ø 1,5Ø 1,02Ø 0,76L *)8L16L *) = bei First-Make Einsatz Ground eines Pinvoreilenden Erdstiftes21 max.10210L *)L1Socket Contact Buchsen ØFrame for Sockets, without Guide PinsØ 0,76Ø 1,02Ø 1,5Ø 2Ø 2,41Ø 3Ø 4Ø 5Frame for Pin Contacts, with Guide PinsCenter Mittelstück Piece mit withCenter Mittelstück Piece mit withVerriegelungsmöglichkeitLocking ModuleVerriegelungsmöglichkeitLocking ModuleEndstück Piece links Left (On Endstück rechts Endstück linksEndstück rechtsauf Anfrage Request)Piece Right Piece Left (On auf Anfrage Request)Piece Right3737Ø 4,3Ø 8,55,55,58,5 z15 l8,5 z15 lLLPart Numbers for Frame PartsPlease assemble the part numbers as follows:XFührungsstifteGuide Pins(nur (only zur for Eigenzentrierung)selfcntering)Ø 4,33,5Centering Zentrierbuchse Socketaxiales free Spiel: space: 0,2 0,2radiales free Spiel: space: 0,6 0,6(parts (Teile werden are delivered loseloose) mitgeliefert)x = Number of ModulesSize l = x · y + z (l max. = 152,5 mm for 60 Units)y = Width of Modules; Size L = l + 30z = Center Module = 12.7 mm (.500") (optional)Order Example:Frame with guide pins with l = 127.1 mm has 50 units at 2.54 mm each.( X = Length of guide pins)611 020 050 600 000; X = 10611 021 050 600 000; X = 12,5611 050 050 600 000; X = 10 with labeling611 025 050 600 000; X = 21 locking spindleFrame without guide pins with l = 127,1 mm has 50 units at 2.54 mm each.610 020 050 600 000611 050 050 600 000 ( with labeling)Individual frame parts are available on request.Page 30<strong>ODU</strong> Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, D-84453 Mühldorf/Inn, Tel. +49/86 31/61 56-0, Fax +49/86 31/61 56 49, www.odu.de
Aluminum FrameAlignment Requirements between Surface B and Surface Sfor Standard versionThe values are for connectors in mated condition and are determined by the float in the guide bushings.B<strong>ODU</strong>-<strong>MAC</strong> Socket Part (Fixed)Mounted on surface Bwithout float.Guide Pin for S into BSCylinder head screwGuide Bushing:Axial Float: ± 0,1 mmRadial Float: ± 0,6 mmPins only forself-guidingof <strong>ODU</strong>-<strong>MAC</strong><strong>ODU</strong>-<strong>MAC</strong> Pin Part (Plug)mounted with Guide Bushing(floating) onto surface S<strong>ODU</strong> Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, D-84453 Mühldorf/Inn, Tel. +49/86 31/61 56-0, Fax +49/86 31/61 56 49, www.odu.de Page 31