RAE ppbRAE 3000 User's Guide - Geotech

ppbRAE 3000 User’s GuideThe current mode is indicated by a dark circle within the circle infront of either Hygiene or Search.1. Select Hygiene or Search by pressing [N/-]. The highlightingchanges from one to the other each time you press [N/-].2. Press [Y/+] to select that mode for the instrument.3. Press [MODE] when you want to register your selection toplace the instrument in the selected mode.4. Press [Y/+] to commit the change and exit to the MonitorSetup screen, or press [N/-] to Undo (exit to the MonitorSetup screen without changing the Mode).Site IDEnter an 8-digit alphanumeric/character Site ID in the programmingmode. This Site ID is included in the datalog report.1. Press [Y/+] and the display shows the current site ID.Example: “RAE00001.” Note that the left-most digit flashesto indicate it is the selected one.2. Press [Y/+] to step through all 26 letters (A to Z) and 10numerals (0 to 9).Note: The last four digits must be numerals.3. Press [N/-] to advance to the next digit. The next digit to theright flashes.Repeat this process until all eight digits of the new site ID areentered.Press [MODE] to exit.If there is any change to the existing site ID, the display shows“Save?” Press [Y/+] to accept the new site ID. Press [N/-] to discardthe change and move to the next sub-menu.66