12.07.2015 Views

Probing Systems For Co-ordinate Measuring machines - Teknikel

Probing Systems For Co-ordinate Measuring machines - Teknikel

Probing Systems For Co-ordinate Measuring machines - Teknikel

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Probing</strong> systems forco-<strong>ordinate</strong> measuring <strong>machines</strong>SP600 family features and benefits:• High speed scanning up to 300 mm/s(11.81 in/s), fast point measurement and highfrequency response• Low probing forces give maximum applicationfl exibilityScanning probes4-13• Three variants; SP600, SP600M and SP600Qallows the ideal probe match to suit the CMM• Extremely robust design will withstandmoderate collisions• Fast interchange between stylus confi gurationspermits the best solution for the application andincreases productivity - automatic changingwith either SCR600 or SCP600 mounted onMRS• <strong>Co</strong>mpatible with Renishaw’s autochangerack systems to allow changing betweenRenishaw’s other probes fi tted with an autojoint• Excellent product life with a MTBF in excess of50,000 hours gives low cost of ownershipSpecification summarySP600, SP600M and SP600QPRINCIPLE APPLICATIONHigh speed, contact form scanning and fast point measurement applicationsPROBE ATTRIBUTES3-axis measurement X, Y, ZLinear and parallel motion in all axesMEASUREMENT RANGE±1 mm (±0.04 in) X, Y, Z in any attitude using a 300 mm (11.81 in) stylusOVERTRAVEL RANGE±X, ±Y and +Z are protected by a kinematic break out joint on the SH600+Z is protected by a bump-stop designRESOLUTION0.1 µm (0.000004 in) with optional AC2 interface design1 µm (0.00004 in) with optional AC1 interface cardSPRING RATE 1.2 N/mm (7.05 ozf) nominal (X, Y, Z)STYLI Thread M4 standard rangeLengthMass200 mm (7.87 in) maximum using SH600 STD300 mm (11.81 in) maximum using SH600 EXT20 g (0.7 oz) maximumPOWER SUPPLY +12 V to -12 V, 5 V (±10%)OUTPUTS (X, Y, Z)Analogue proportionalVoltage output scaling: 4 V/mm to 8.5 V/mm (dependant on stylus)WEIGHTSP600SP600MSP600Q172 g (6.07 oz) excluding stylus216 g (7.62 oz)299 g (10.55 oz)MOUNTINGSP600SP600MSP600QAdaptors to suit clutch, shank adaptor or CMM shankMultiwired autojointDirect quill mounting to the CMMSUITABLE INTERFACEDirectly to UCC orAC1 or AC2 interface cards (ISA bus)CHANGING RACK OPTIONSSCR600 4 port rackSCP600 single port unit(s) mounted to the MRS

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!