Probing Systems For Co-ordinate Measuring machines - Teknikel

PHS1 head kitThe PHS1 head is not locked into position in thesame manner as an indexing head. Instead, it isdriven to approximately the required position andwhen a probing point is taken, the axes of the headlatch simultaneously with the axes of the CMM togive accurate probe readings.The PHS1 head is controlled directly via a PCinterface card in the CMM controller, and requiresfull integration by the equipment supplier. Fullinformation is given in the PHS1 programmersguide (PD-2100-9015).A range of different probes can be fi tted andautomatically exchanged. These includetouch-trigger probes and non-contact scanningprobes.Motorised probe headsServo type7-6Extra long extensions allow the Renishaw triggerprobes to measure otherwise inaccessible features.A kinematic mount (KM1/KM2) allows quick fi xingof the head to the machine and fast changeover toother heads.PH10M or PH10T heads can be fi tted (via a PHA1,PHA2 or a PHA3 probe head adaptor - details onrequest) instead of PHS1 in applications whereexisting parts need to be inspected without theneed to re-write the programs for PHS1.The head is protected by a built-in overtravelprotection unit that can be confi gured to stop themachine in the event of a collision.An air supply to the head is recommended foraxis motor cooling and optimum metrologyperformance.247 mm (9.72 in)Ø100 mm (3.94 in)49.75 mm(1.96 in)Ø90 mm(3.54 in)