Probing Systems For Co-ordinate Measuring machines - Teknikel

AM1 adjustment module for PH10T/M,PH6M and MIHThe AM1 adjustment module has been designed for use withthe PH6M and MIH manual probe heads and the PH10T/Mmotorised probe heads. It provides quick and accurateangular alignment of the probe head with the CMM’s axesand/or the autochange rack.In addition, the quick release mechanism allows the head tobe removed for storage and subsequently replaced withoutfurther alignment. Built in overtravel protection decreases therisk of head damage.RollLock/unlock screwMotorised probe headsIndexing typeAM1 adjustment module forPH10T/M - PH6M - MIHPitch8-5Pitch adjusting capstanYawadjustingscrewYawadjustingscrewOvertravelRoll adjusting capstanYawAM2 adjustment module for PH10MQPH10MQ motorised probe head is mounted directly to thequill via the AM2 adjustment module.AM2PH10MQM = MultiwireQ = Quill mountedSpecification summary AM1 AM2SIZE 60 × 15.5 mm (2.36 × 0.61 in) nominal 80 × 10 mm (3.15 × 0.39 in) nominalADJUSTMENT±2° in pitch and roll* (recommended)±1° in pitch and roll* (recommended)±4.5° in yaw±1° in yawOVERTRAVEL ±3.5° in pitch and roll 0°MOUNTINGMounts to quill using shanksMounts direct to quillAlternatively direct to quill using OEM adaptorWEIGHT 150 g (5.29 oz) 48 g (1.69 oz)* up to ±5.5° in pitch and roll is possible but this is at the expense of overtravel