Probing Systems For Co-ordinate Measuring machines - Teknikel

MIH manual indexingprobe headThe MIH is a versatile manual indexing probehead. It has programmable indexing positionsusing 7.5° increments and has an autojointprobe mount for fast repeatable probe changing.These features can increase the productivity ofa manual CMM.MIH-S manual indexing probeheadThe MIH-S is an enhanced version of the MIHwhich enables the feedback of positional statusto the PC over an RS232 serial communicationlink, via the MIH-SI interface.MIHMIH-SManual probe headswith integral M8/autojoint probe mount5-4This enables the CMM computer to:• Verify that the MIH-S has been moved tothe correct position and locked into place.• Identify the locked position of the MIH-S.Measurement performance, functionality anddimensions are the same as for the MIH.MIH features and benefits:• Repeatable indexing in 720 positions• An integral LCD enables easyprogramming of probe orientationpositionsMIH / MIH-S• 20 probe positions can be memorised• Compatible with most Renishawprobes (excluding all multiwiree.g. TP7M)• Capable of carrying up to 300 mm(11.81 in) extension for deep partmeasurementPlease refer to page 5-1 for probecompatibility information102 mm (4.0 in)R 62.5 mm(2.46 in)76 mm (3.0 in)62 mm(2.44 in)5.0 mm(0.19 in)Specification summaryMIH and MIH-SHEAD MOUNTINGShank to suit CMM (MS range)PROBE MOUNTINGAutojoint (i.e. there is no multiwire capacity)PROBE STATUS INDICATIONLEDCABLE CONNECTION MIH - 5-pin DIN 180° socket MIH-S - 12-pin HiroseA AXIS INDEXING0° to 105° in 7.5° steps = 15 positionsB AXIS INDEXING±180° in 7.5° steps = 48 positionsWEIGHT580 g (20.45 oz)REPEATABILITY OF POSITION (2σ) 1 µm (0.00004 in) when used with a TP6A and 21 mm (0.83 in) stylusMAXIMUM EXTENSION BAR300 mm (11.81 in)MAXIMUM RECOMMENDED TORQUE 0.45 NmSUITABLE HEAD INTERFACE PI 4-2, PI 200 or PI 7-2MIH-S HEAD INTERFACEUses MIH-SI interface (RS232 communication)