Probing Systems For Co-ordinate Measuring machines - Teknikel

REVO features and benefits:• Incorporates Renscan5 fi ve axis scanningtechnology minimising CMM motion and theassociated CMM dynamic errors• Increased measuring speed, up to 500 mm/secresulting in increased measurement throughput• Data collection rates up to 6,000 points persecond• Infinite positioning and five axis motion reducesnonproductive transitions between features• Stylus wear minimised by extremely lowscanning forcesHeadMotorised probe headsServo type• Infi nite positioning and fi ve axis motion aidaccess to diffi cult features• Rapid calibration with all positions inferredmeans more time measuring7-2• Maximum reach up to 500 mm with maintainedeffective working length• Standard M2 styli for convenienceProbe• Probe and stylus changing capability allowingfl exibility and future probing technologycompatibilityStylus holderStylusSpecification summaryOPERATING TEMPERATURESTORAGE TEMPERATUREWEIGHT (excluding probe and cables)DIMENSIONS Height (overall)B axisA axis swept diameterREVO14 °C to + 30 °C (57 °F to 86 °F)-10 °C to +70 °C (14 °F to 158 °F)1.75 kg239 mm (9.41 in)86 mm (3.40 in) square118 mm (4.65 in)AIRIncoming supply to Particle size Class 4 15 µmSPECIFICATION fi lter specifi cation Dirt concentration Class 4 8 mg/m³(ref: ISO8537.1) DewpointClass 4 +3 °CLine pressure of 6 to 6.5 barOilClass 4 5 mg/m³After fi ltration air Particle size Class 2 1 µmspecifi cationDirt concentration Class 2 1 mg/m³(ref: ISO8537.1) DewpointClass 3 -20 °CPressure 5 Bar.OilClass 2 0.1 mg/m³MOVEMENT SPEED3 revs/secROTATION ANGLES A axis -5° to +120°B axisContinuousANGULAR RESOLUTION0.08 arc secBEARINGSAirCHANGE RACK SYSTEMAllowing both probe changing and stylus holder changing