Probing Systems For Co-ordinate Measuring machines - Teknikel

Probing systems forco-ordinate measuring machinesTP6 / TP6A probesM8 × 1.25 threadThe TP6 is an M8 thread mounted probe whilethe TP6A has an autojoint, which means that itTouch-trigger probeswithout stylus module changing2-3can be changed quickly and easily without theneed to re-qualify stylus tips. The probe designis robust with large overtravel and adjustabletrigger force.TP6 / TP6A features and benefits:• Autojoint or M8 version• Long stylus carrying capabilityØ25 mm(0.98 in)6.5 mm(0.26 in)M3 × 0.5 thread22° 22°MaximumXY overtravel15 mm (0.59 in)41 mm (1.61 in)+Z overtravel5.5 mm (0.22 in)• Large stylus overtravel• Robust• Adjustable trigger force range• M3 stylus mountØ25 mm(0.98 in)6.5 mm(0.26 in)15 mm (0.59 in)46.5 mm (1.83 in)49 mm (1.93 in)22° 22°+Z overtravel5.5 mm (0.22 in)MaximumXY overtravelSpecification summary TP6 TP6APRINCIPAL APPLICATIONRobust universal DCC andmanual CMMs.As TP6 but with fastprobe exchange withoutrequalifi cation.SENSE DIRECTIONS 5-axis: ±X, ±Y, +Z 5-axis: ±X, ±Y, +ZUNIDIRECTIONAL REPEATABILITY MAXIMUM(2σ µm) (at stylus tip)0.35 µm (0.000014 in) 0.35 µm (0.000014 in)PRE-TRAVEL VARIATION 360° (XY PLANE) ±1 µm (±0.00004 in) ±1 µm (±0.00004 in)WEIGHT 56 g (1.98 oz) 76 g (2.68 oz)STYLUS RANGE M3 M3STYLUS FORCE RANGE (ADJUSTABLE) 0.11 N - 0.3 N 0.11 N - 0.3 NSTYLUS FORCE (SET BY RENISHAW) 0.11 N - 0.13 N 0.11 N - 0.13 NSTYLUS OVERTRAVEL (TYPICAL)XY plane±22°±22°+Z axis5.5 mm (0.22 in) @ 0.11 N5.5 mm (0.22 in) @ 0.11 N2 mm (0.08 in) @ 0.3 N2 mm (0.08 in) @ 0.3MAXIMUM EXTENSION ON PH10 SERIES 200 mm (7.87 in) 200 mm (7.87 in)MOUNTING METHOD M8 thread AutojointSUITABLE INTERFACE PI 4-2, PI 7-2, PI 200, UCC PI 4-2, PI 7-2, PI 200, UCCAbove data applies to test conditions as follows: Stylus length 21 mm (0.83 in).Stylus velocity 480 mm/min (1.57 ft/min). Stylus force 0.11-0.13 N