Fusion FH-100 and FHR-100 - Vinten Radamec
Fusion FH-100 and FHR-100 - Vinten Radamec
Fusion FH-100 and FHR-100 - Vinten Radamec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Fusion</strong> <strong>FH</strong>-<strong>100</strong> <strong>and</strong> <strong>FH</strong>R-<strong>100</strong> pan <strong>and</strong> tilt heads<br />
Accessories<br />
The head is supplied with st<strong>and</strong>ard accessories (Fig. 4), including four fixing bolts <strong>and</strong> washers<br />
used when mounting the head onto a tripod or pedestal mounting plate, a <strong>Vinten</strong> spanner <strong>and</strong><br />
two telescopic pan bars for use when the head is operated manually.<br />
Optional accessories include a <strong>Vinten</strong> heavy-duty Quickfix adaptor (part no. 3490-3) that allows<br />
operators to easily <strong>and</strong> quickly mount <strong>and</strong> remove the head from a pedestal or tripod, <strong>and</strong> an<br />
intermediate plate (part no. 3384-11) used to raise the camera on the camera cradle, thereby<br />
adjusting the camera C of G height. For more information refer to the Parts list on page 40.<br />
Mounting the head<br />
All variants of the <strong>FH</strong>-<strong>100</strong> head have a st<strong>and</strong>ard <strong>Vinten</strong> four-hole mounting plate that is<br />
compatible with the <strong>Vinten</strong> Quickfix base. The head can be mounted directly onto a pedestal,<br />
typically a <strong>Fusion</strong> FP-188 pedestal, an FPH-188 height drive or a <strong>Vinten</strong> heavy-duty tripod.<br />
Place the head onto the pedestal or tripod mounting plate ensuring that the head cannot fall.<br />
Secure with the four fixing bolts <strong>and</strong> washers supplied, then use the <strong>Vinten</strong> spanner to tighten<br />
the fixing bolts.<br />
16<br />
<strong>Vinten</strong> spanner<br />
Part No. J551-001<br />
Washers (4 off)<br />
Part No. L602-122<br />
Head fixing bolt (4 off)<br />
Part No. L054-714<br />
Fig. 4 St<strong>and</strong>ard accessories<br />
Telescopic pan bar (2 off)<br />
Part No. 3219-91<br />
CAUTION! Hold a fixing bolt in position thought the mounting plate <strong>and</strong> ensure that<br />
the threaded end does not project more than 12 mm (0.47 in.) above the<br />
mounting plate face.<br />
CAUTION! Risk of damage to the product – Do not overtighten the fixing bolts.
Change language