Fusion FH-100 and FHR-100 - Vinten Radamec
Fusion FH-100 and FHR-100 - Vinten Radamec
Fusion FH-100 and FHR-100 - Vinten Radamec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Camera lens cabling<br />
Operators guide<br />
The head has an integral lens drive capability that can directly drive any full-servo digital Canon<br />
or Fujinon broadcast lens. A lens cable to suit a Canon or Fujinon lens can be supplied to<br />
connect the camera lens to the head.<br />
A digital camera lens requires a single RS232 focus <strong>and</strong> zoom cable connected from the lens to<br />
the Focus/Digital port on the head. Analogue lenses require separate zoom <strong>and</strong> focus cables<br />
to be connected from the lens to the head. The analogue lens zoom cable connects to the Zoom<br />
port <strong>and</strong> the analogue lens focus cable to the Focus/Digital port on the head.<br />
NOTE:<br />
1. A digital lens may have analogue zoom <strong>and</strong> focus h<strong>and</strong> controls connected<br />
simultaneously with a RS232 digital zoom/focus cable. However, the analogue h<strong>and</strong><br />
controls will not function until the digital cable connection is removed, either at the head<br />
or the lens.<br />
2. A separate h<strong>and</strong>-control unit (HCI) is available to automate the switching of camera lens<br />
control (Canon or Fujinon) between robotic lens control <strong>and</strong> manual h<strong>and</strong> controls—<br />
depending on the operating mode of the robotic head.<br />
Connecting to the <strong>Fusion</strong> H<strong>and</strong> Control Interface (HCI)<br />
The <strong>Fusion</strong> H<strong>and</strong> Control Interface (HCI) is mounted on to the underside of the camera cradle<br />
<strong>and</strong> is supplied with a single zoom/focus control cable that provides connection between the<br />
head Zoom <strong>and</strong> Focus/Digital ports <strong>and</strong> the Zoom/Focus control input port on the HCI unit.<br />
The unit is also supplied with the appropriate cables for connection to the pan bar-mounted h<strong>and</strong><br />
controls <strong>and</strong> camera lens. Fig. 10 below shows the connection between the <strong>Vinten</strong> <strong>Radamec</strong><br />
<strong>Fusion</strong> HCI <strong>and</strong> the head.<br />
Fig. 10 <strong>Fusion</strong> HCI-to-head lens ports connection<br />
23