Fusion FH-100 and FHR-100 - Vinten Radamec
Fusion FH-100 and FHR-100 - Vinten Radamec
Fusion FH-100 and FHR-100 - Vinten Radamec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Fusion</strong> <strong>FH</strong>-<strong>100</strong> <strong>and</strong> <strong>FH</strong>R-<strong>100</strong> pan <strong>and</strong> tilt heads<br />
Electrical connections<br />
All external ports are located at the back of the head (see Fig. 2 on page 12). When installing<br />
cabling, it is important that all cables are dressed <strong>and</strong> secured to prevent any interference with<br />
the pan <strong>and</strong> tilt movements of the head. Cables can be secured to the cable restraint [14] located<br />
on the back of the head. It is important that all cables are connected on the head before the<br />
payload is balanced, as the weight of the cables affects the balance of the head.<br />
Power <strong>and</strong> Ethernet connections<br />
The head has an internal power supply unit that allows for mains power to be supplied to the<br />
head directly from the studio supply, or from a <strong>Fusion</strong> pedestal or height drive. The power <strong>and</strong><br />
Ethernet cables are usually combined. A studio floor cable can be used to connect the head to<br />
the studio power <strong>and</strong> Ethernet data communications. A shorter combined cable, the Head<br />
communication cable, is supplied with the <strong>Fusion</strong> pedestal or height drive provides connection<br />
between the pedestal or height drive <strong>and</strong> the head. For more information consult the relevant<br />
<strong>Fusion</strong> pedestal or height drive Operators Guide.<br />
Connecting the head to a <strong>Fusion</strong> pedestal or height drive<br />
When mounting an <strong>FH</strong>-<strong>100</strong> or <strong>FH</strong>R-<strong>100</strong> head onto a <strong>Fusion</strong> pedestal (FP-145/FP-188) or height<br />
drive (FPH-188), the power <strong>and</strong> Ethernet supply to the head can be obtained directly from the<br />
pedestal/height drive using the Head communication cable, thereby reducing the number of floor<br />
cables. The power <strong>and</strong> Ethernet connections from the <strong>Fusion</strong> pedestal/height drive to the head<br />
are shown in Fig. 8.<br />
20<br />
Fig. 7 Fitting the FVR box to the head