OsiSense XS - studiecd.dk

Lexium 32Motion ControlModules for Lexium 32M1Communication modulesLexium 32M can be connected to the following communication buses and networks: CANopen and CANmotion, DeviceNet, Profibus DP V1, EtherNet/IPReference CANopen / CANmotion module with 2 * RJ 45 connectors VW3 A3 608CANopen / CANmotion module with SUB-D 9 connector VW3 A3 618DeviceNet module VW3 M3 301Profibus DP V1 module VW3 A3 607EtherNet/IP module VW3 A3 616Module CANopen / CANmotion avec bornier 5 points de vis VW3 A3 628Module EtherCAT with 5 points screw terminal VW3 A3 60123Second encoder modulesMachineMotorLexium 32M has an input for an additional encoder to connect third party motor (motor encoder) or to improve positioning accuracy (machine encoder)Reference Module for resolver encoder VW3 M3 401 xModule for digital encoder (A/B/I, BiSS, EndDat 2.2, SSI) VW3 M3 402 xModule for analog encoder (1 Vpp/Hall, 1 Vpp, Hiperface) VW3 M3 403 x (Hiperface only) x45Safety moduleeSM safety module allows Lexium 32M servo drives to access additionnal IEC/EN 61800-5-2 safety functions: SS1, SS2, SLS, SOSReference eSM safety module allows VW3 M3 501DescriptionFrom servo motorConnection elementsPower cordsetsCables equipped with one M23 industrial connector(servo motor end)Cables equipped with oneM40 industrial connector(servo motor end)BMH 070pp, BMH 100pp, BMH 1402P, BMH 1403P BMH 205pP, BSH 1402T,BMH 1401P, BSH 055pp,BSH 1403T, BSH 1404PBSH 070pp, BSH 100pp,BSH 1401PTo servo drive LXM 32pppppp LXM 32pD72N4 LXM 32pD72N4Composition [(4 x 1.5 mm 2 ) + (2 x 1 mm 2 )] [(4 x 2.5 mm 2 ) + (2 x 1 mm 2 )] [(4 x 4 mm 2 ) + (2 x 1 mm 2 )]Length 3 m 3 m 3 mReference VW3 M5 101 R30 VW3 M5 102 R30 VW3 M5 103 R306789Encoder cordsetsDescriptionFrom servo motorTo servo driveSinCos Hiperface ® encoder cables equipped with an M23 industrial connector (servo motor end)and an RJ45 connector with 8 + 2 contacts (servo drive end)BMH ppppp, BSH pppppLXM 32ppppppComposition [3 x (2 x 0.14 mm 2 ) + (2 x 0.34 mm 2 )]LengthReference3 mVW3 M8 102 R3010Other versions: please consult our Customer Care Centre.4/51