OsiSense XS - studiecd.dk

Machine safetyThis document is a selection ofthe top selling products.12Safety standards ..................................................................................................................................9/2 to 9/11Automation ........................................................................................................................................... 9/12 to 9/17Safety PLCsSafety controllers and modules3AS-Interface Safety at work ................................................................................................... 9/18 and 9/19Safety monitors and interfaces4Detection ................................................................................................................................................. 9/20 to 9/27Safety switchesSafety limit switchesCoded magnetic technologySafety matsSafety light curtainsOperator dialogue ............................................................................................................................ 9/28 to 9/32Emergency stopsFoot switchesControl unitsProducts for explosive atmospheres (see chapter 10 “Explosive Atmospheres”)567Motor control .................................................................................................................................. 9/33 to 9/35Switch disconnectorsTeSys motor starters8> New machines - the Machinery DirectiveThe Machinery Directive 98/37/EC is to compel manufacturers to guarantee a minimum safety level for machinery and equipmentsold within the European Union.From 29 December 2009, the new European Machinery Directive 2006/42/EC is effective. Machines have to comply with theEssential Health and Safety Requirements (EHSRs) listed in Annex I of the Directive, thus setting a common minimum level ofprotection across the EEA (European Economic Area).Machine manufacturers, or their authorised representatives within the EU, must ensure that the machine is compliant, theTechnical File can be made available to the enforcing authorities on request, the CE marking is affixed, and aDeclaration of Conformity has been signed, before the machine may be placed on the market within the EU.9109/1