OsiSense XS - studiecd.dk

TeSysLUTMTeSys GV3LCircuit-breakersController for 3-phase motorsMULTIFUNCTION protection1TeSys LC1DContactor= +234Function characteristics Control base for use Multifunctionwith contactorscontrol unitTeSys D (LC1D..) TeSys F (LC1F..) Class 5 to 35- Thermal overload protection against: LUTM10BL LUTM20BL LUCMT1BLshort-circuit, overcurrent,phase failure or imbalance,insulation breaks (equipment only).- Manual, automatic or remote reset,- Thermal overload test function,- Overtorque and no-load running, alarm,- Motor operation log,- Motor parameters display on LUCM.., PC or HMI,- Integrated Modbus communication.ADVANCED protection567Function characteristics Control base for use Advancedwith contactorscontrol unitTeSys D (LC1D..) TeSys F (LC1F..) Class 10 Class 20- Thermal overload protection against: LUTM10BL LUTM20BL LUCBT1BL LUCDT1BLshort-circuit, overcurrent,phase failure or imbalance,insulation breaks (equipment only).- Manual reset following thermal fault.- Thermal overload test function.8Current transformers910Type of transformerSupply voltage24 V DCOperating current Primary 30 A 50 A 100 A 200 A 400 A 800 ASecondary1 AReferences LUTC0301 LUTC0501 LUTC01001 LUTC02001 LUTC04001 LUTC05001Above 32 A, the TeSys U controller provides a motor starter management system solution identical to that provided by the TeSys U starter-controller.Used in conjunction with a short-circuit protection device and a contactor, it provides a motor starter whose functions are the same as those of a TeSys U starter-controllerand, in particular, provides the following functions: overload protection, motor starter control and application monitoring.It comprises a control unit, whose adjustment range is compatible with the secondary of current transformers, and a control base that also enables the fitting of a function module orcommunication module.It requires a 24 V DC external power supply.5/38Other versions: please consult our Customer Care Centre.