OsiSense XS - studiecd.dk

111222 21PreventaDetectionIllustration of contacts with the actuatorinserted in the head of the switchISO entry(to EN 50262)Safety switchesand actuators3012345678131422 212-pole contactSlow break(1NC+1NO)2-pole contactSlow break(2NC)3-pole contactSlow break(1NC+2NO)3-pole contactSlow break(2NC+1NO)6020/22Without lockingPlastic, double insulated switches Type XCSMP Type XCSPA and TA Type XCSLEpre-cabled, L = 2 m 1xISO M16 entry. (2) 2xISO M16 entries. (2) 3 x ISO M20 cable entriesActuation speed (min → max) 0,05 m/s → 1,5 m/s 0,1 m/s → 0,5 m/s 0,1 m/s → 0,5 m/sDegree of protection IP 67 IP 67 IP 67 + IP 66Rated operational characteristics (conforming to EN IEC 60947-5-1) AC 15, C 300 / DC 13, Q 300 AC 15, A 300 / DC 13, Q 300 AC 15, B 300 / DC 13, Q 300Dimensions (body + head) W x D x H 30 x 15 x 87 mm 30 x 30 x 93,5 mm 52 x 30 x 114,5 mm 43.5 x 51 x 205 mmSolenoid supply voltage – – – 24 VAC/DCComplete switch 1NC+1NO break before make, slow break XCSMP59L2 (3) XCSPA592 – XCSLE25253122NC slow break XCSMP79L2 (3) XCSPA792 – XCSLE27273121NC+2NO break before make, slow break XCSMP70L2 (3) XCSPA892 XCSTA592 XCSLE35353121NC+2NO snap action – – – –2NC+1NO break before make, slow break XCSMP80L2 (3) XCSPA992 XCSTA792 XCSLE37373122NC+1NO snap action – XCSPA492 – –3-pole contactSlow break(1NC+2NO)3020/2240,320/22(1) For locking on energisation of solenoid, please refer to www.schneider-electric.com.(2) With entry for n° 11 (Pg 11) cable gland, replace the last digit in the reference by 1 (example: XCSPA592 becomes XCSPA591).(3) For other models, please refer to www.schneider-electric.com.Metal switches3-pole contactSlow break(2NC+1NO)Illustration of contactswith the actuatorinserted in the headWithout locking With interlocking, manual unlockingof the switchBy button By key lock Locking on de-energisation of solenoid (1)Type XCSA/B/C1 x ISO M20 cable entry (2)Type XCSLF3 x ISO M20 cable entriesActuation speed (min → max) 0.1 m/s → 0.5 m/s 0.1 m/s → 0.5 m/sDegree of protection IP 67 IP 67 + IP 66Locking on de-energisationof solenoid (1)Rated operational characteristics (conforming to EN IEC 60947-5-1) AC 15, A 300 / DC 13, Q 300 AC 15, B 300 / DC 13, Q 300Dimensions (body + head) W x D x H 40 x 44 x 113.5 mm 52 x 44 x 113.5 mm 52 x 44 x 113.5 mm 43.5 x 51 x 205 mmSolenoid supply voltage – – – 24 VAC/DC 24 VAC/DCComplete switch 1NC+2NO break before make, slow break XCSA502 XCSB502 XCSC502 XCSLF3535312 XCSLF3535412 (3)2NC+1NO break before make, slow break XCSA702 XCSB702 XCSC702 XCSLF3737312 XCSLF3737412 (3)1NC+1NO break before make, slow break2NC snap breakISO entry(to EN 50262)(1) For locking on energisation of solenoid, please refer to www.schneider-electric.com.(2) With entry for n° 13 (Pg 13.5) cable gland, replace the last digit in the reference by 1 (example: XCSA502 becomes XCSA501).(3) With mushroom head emergency release button.AccessoriesXCSLF2525312XCSLF2727312Straight actuator Right-angled actuator Pivoting actuator, RH door Pivoting actuator, LH doorFor safety switches XCSMPActuatorsReferences XCSZ81 XCSZ84 XCSZ83 XCSZ85153.330Available2Q 2011153.3153.330910Straight actuator Wide actuator L=40 mm (1) Right-angled actuator Pivoting actuator Guard/door retainerFor safety switches XCSPA/TA/TE Actuators Retaining deviceReferences XCSZ11 XCSZ12 XCSZ14 XCSZ13 XCSZ21(1) For L = 29 mm, reference = XCSZ15.Straight actuator Wide actuator Pivoting actuatorFor safety switches XCSA/B/C/LE/LF Actuators Door lockReferences XCSZ01 XCSZ02 XCSZ03 XCSZ059/20Other versions: please consult our Customer Care Centre.