OsiSense XS - studiecd.dk

The Protect Area Design software1234Protect Area Design software is a configurator that enablesselection of the zone protection device like sensing matsrequired for safety applications.This software enables the user, via a graphic interface, tocreate, test or modify a safe working area in the vicinity of apotentially dangerous machine.Having established the predefined fields (safety level of thecontrol system, dimensions of the machine, etc.), the ProtectArea Design software calculates the safety distance in relationto the reaction time of the machine and the approachdirection to the hazardous zone. It then displays a recommendedsafety protection solution and creates the list ofproducts (references, quantities and accessories to be used).Protect Area Design software is user-friendly and compatiblewith Windows 98, NT, 2000 and XP.5678Protect Area DesignSafety mats configuration softwareThe Protect Area Design software enables determination of the shape tobe covered and optimisation of the use of mats using proposed solutionssuch as “Coverage of the zone to be protected” or “Optimised coverageof the zone to be protected”.b For configuration in “Assisted procedure” mode the software enablesaccess to the following menus:v description of the installation: description of the machine, reaction time,v description of the structure and access to the hazardous zone,v selection of configuration according to the zone to be covered,v calculation.b For configuration in “Unassisted procedure” mode the software enablesaccess to the following menus:v replacement of an existing installation,v selection of surface to cover and measurements.910Before using the configurator, it is necessary to perform thefollowing 2 procedures:risk assessment and risk reduction in accordance withEN/ISO 12100-1, in order to decide the contribution of therisk from safety mat and to select the appropriate controlsystem category.9/10Other versions: please consult our Customer Care Centre.