OsiSense XS - studiecd.dk

1Lexium TAS Lexium CAS 4 Lexium CAS 3 Lexium CAS 2Linear tablesCantilever axes with mobile structure onprofileCantilever axes with mobile structure onparallel rodsTelescopic axes1Typically horizontal Typically vertical Typically horizontalOn carriage On the side of the profile or on the 2 end blocks On the 2 end blocks On carriageBallscrew Toothed belt Toothed belt or rack Toothed beltDouble, ball Ball or roller Ball Ball or rollerHigh precision movement (positioning,repeatability, guiding), High feed forces,High rigidity, Feed movement withoutmechanical backlashLong stroke length, High feed forces, Option Compact, Mobile structure with light travelto mount the load on the side of the profile or weighton the end blocks, High rigiditygg gggg gggg gggggggggg ggg ggg gg150 kg 50 kg 18 kg 35 kg2580 N 2150 N 705 N 1500 N1 m/s 3 m/s 3 m/s 3 m/s1500 mm 1200 mm 500 mm 2400 mm± 0.02 mm ± 0.05 mm ± 0.05 mm ± 0.1 mmChoice of pitch , Several different motormounting optionsChoice of guide type: Ball (for applicationsrequiring high forces and torques) or roller(simple, cost-effective solution), Protectivemetal strip, Anti-corrosion version, Widerange of sensorsAnti-corrosion version, Anti-static beltTAS 4 CAS 4 CAS 3 CAS 2Long stroke length from a compact unit,High rigidity, High dynamic responseChoice of guide type: Ball (for applicationsrequiring high forces and torques) or roller(simple, cost-effective solution), Choice ofcarriage type for adapting to the load23456Lexium MAX P Lexium MAX R2 Lexium MAX R3Linear positionersPortal robots2 3Horizontal and vertical: Combination of one X-axis and oneZ-axisHorizontal: Combination of two perpendicular axes X and YHorizontal and vertical: Combination of two perpendicularaxes X and Y and one Z-axisOn the side or on the end blocks of the Z-axis profile On the Y-axis carriage On the side or on the end blocks of the Z-axis profileMAX S + CAS 4 axesMAX S + CAS 3 axesToothed belt on each axisBall or rollerMAX S + MAX H axesMAX S + PAS 4pB axesMAX S + MAX H + CAS 4 axesMAX S + MAX H + CAS 3 axesDynamic load positioning Long stroke length on both axes Long stroke length on three axes50 kg 130 kg 50 kg5500 mm– 1500 mm 1500 mm1200 mm – 1200 mmChoice of guide type: Ball (for applications requiring high forces and torques) or roller (simple, cost-effective solution), Wide range of sensorsSupplied as standard: Protective metal strip , Anti-corrosion version78910MAX P MAX Rp2 MAX Rp3Other versions: please consult our Customer Care Centre.4/57