MediaShield User's Guide - Nvidia's Download site!!

CHAPTER 2Configuring the BIOS4 From the RAID Config window, globally enable RAID, then enable the SATA portswith disks that you want to use for RAID.Phoenix - Award BIOS CMOS Setup UtilityRAID ConfigRAID EnableSATA 1 (A0) RAIDSATA 2 (A1) RAIDSATA 3 (B0) RAIDSATA 4 (B1) RAIDSATA 5 (C0) RAIDSATA 6 (C1) RAID[Enabled][Enabled][Enabled][Enabled][Enabled][Disabled][Disabled]Item HelpMenu LevelFigure 2.4:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5: Previous Values F6: Fail-Safe Defaults F7: Optimized DefaultsRAID Config Window–RAID EnabledIf RAID is enabled globally but not enabled on the individual SATA port, disks on thatport can only be used for non‐RAID applications.In the example in RAID Config Window, four SATA ports are enabled, so the nonbootableRAID array can include up to four SATA disks. If there is a disk connected toʺSATA 5” or “SATA 6”, it cannot be used for RAID.5 Press F10 to save the configuration and exit.The PC reboots.12 MediaShield User’s Guide – Version 6.0