Kantech IP Link Installation Manual - Tyco Security Products

IP Link Installation ManualTable 2: Network status LEDsSpeedActivityLinkremains OFF in a 10BaseT network, remains ON in a 100BaseT network.blinks to show network activity, andsteady when there is intense network activity.turns ON when the network is present, turns OFF when there is no network.Configurations OptionsThe IP Link can be configured through 3 different options:• With EntraPass, when the IP Link is within the same local area network (LAN)• With the KT-Finder application locally through the LAN or remotely through the Internet or wide areanetwork (WAN).• With a web browser like Internet Explorer locally only (LAN)SpecificationsTable 3: Environmental and Electrical SpecificationsDescriptionOperating TemperatureHumidity LevelDC Power InputInput currentSpecifications0°C to 49°C (32°F to 122°F)0 to 85% non-condensing, indoor use only12 VDC175 mATable 4: IP Link SpecificationsDescriptionDimensionsWeightPCB dimensionsCommunication PortsCommunication SpeedFlash ROMRAMSpecifications26.7 x 9.5 x 3.12 cm (10.5 x 3.72 x 1.23 in)0.6 kg (1.3 lbs)8.30 x 13.30 cm (3.25 x 5.25 in)RJ-45 Ethernet 10/100Base-T and RS-232Up to 115200 Baud for serial communication2 MB8 MBTable 5: Characteristics with EntraPassDescriptionSpecificationsMaximum number of controllers per IP Link 32Maximum number of sites per Gateway in EntraPassCorporate Edition and Global Edition256Maximum number of controllers in EntraPass Special Edition 64DN1670-0706 5