NV9 USB manual set - cover sheet - Sensis

NV9 USB Manual Set – Section 4 13NV9 USB Parallel Interface:Pin Name Type Description1 Vend 1 OutputChannel 1 credit, 100ms activelow pulse2 Vend 2 OutputChannel 2 credit, 100ms activelow pulse3 Vend 3 OutputChannel 3 credit, 100ms activelow pulse4 Vend 4 OutputChannel 4 credit, 100ms activelow pulse5 Inhibit 1 InputInhibit Channel 1 by holding thispin HIGH6 Inhibit 2 InputInhibit Channel 2 by holding thispin HIGH7 Inhibit 3 InputInhibit Channel 3 by holding thispin HIGH8 Inhibit 4 InputInhibit Channel 4 by holding thispin HIGH9 Busy OutputBusy signal – output is pulledlow when the validator is busy10 Escrow InputEnable Escrow function byholding this pin LOW1112131415Factory use onlyV In PowerDo not connect+V16 GND Ground GNDWhen operating in Parallel mode the NV9 USB will issue a 100ms active LOW pulse onthe relevant vend line, and a maximum of 4 channels can be used. There is also theoption to use a binary output where the NV9 USB will output a binary pattern on vendlines 1 – 4. Binary mode can be set as an option using a configuration card or with theBank Note Validator Currency Manager Software.Copyright © Innovative Technology Ltd 2012GA550-2