NV9 USB manual set - cover sheet - Sensis

NV9 USB Manual Set – Section 4 30If the belts are worn or damaged, they should be replaced (ITL part number FD106).This is a simple procedure, and is carried out as follows:WARNING!Do not try to disassembleDo not attempt to disassemble the validator head –trying to do this could result in the validator needingreinitialisation, cause personal injury or coulddamage the unit beyond repair. Open the top ofthe unit using therelease catchRelease catch Release thelozenge by gentlypressing thelozenge releasecatchLozengereleasecatch Remove and placethe lozenge on aclean dry surface Press in the largewheels to releasethe belt tensionand then removethe belts, slidingthem off thesmallest wheelsfirstDrive beltsLozenge Replace the beltsby fitting themover the lozenge,largest wheels first Reassemble andclose the unitCopyright © Innovative Technology Ltd 2012GA550-2