NV9 USB manual set - cover sheet - Sensis

NV9 USB Manual Set – Section 1 7The bezel is refitted by pushing the bezel back onto the locating pins and slidingbackwards until all six pins are engaged in the slots. The locking arms will then springback and locate into the bezel.Caution!Check locking arms.Always make sure that BOTH locking arms arefully located in the bezel – trying to operate thevalidator if they are not correctly located cancause unit damage.1.3 InterfacingThe connector needed to set up and interface the NV9 USB Validator is easilyaccessible on the side of the unit:Interface SocketCopyright © Innovative Technology Ltd 2012GA550-2