NV9 USB manual set - cover sheet - Sensis

NV9 USB Manual Set – Section 3 34The fifth tab ‘General Options’ allows you to review and modify a variety of validatorspecific settings, including interface mode:Click these boxes to enable or disablethe Strim and Program Card Functions,and whether the validator will issuecredit after a jam.Check the box next to the interface modeyou want the validator to operate in.These pulse timing settings are onlyused if the validator is set to operatein Pulse mode.Specify the SSP address used by thevalidator in this box.Specific channels (denominations)can be disabled by checking theappropriate box or boxes.The options shown in this areawill vary depending on theinterface type selected.Security riskWARNING!Disabling the Strim Function is not recommendedbecause of the potential security risks.InformationLimited SSP addressrangesThe Validator Manager software will onlycommunicate with the validator if the SSP address isset to 0, 1 or in the range 80-99.Copyright © Innovative Technology Ltd 2012GA550-2