INSTRUCTION MANUAL - Alessandri srl

34 ––––– 3. BEFORE YOU OPERATE(3) Handling of engine oil• Keep the engine oil carefully in store in order to prevent any dust or dirt entrance.• When filling the engine oil to the engine, avoid the spillage and pay attention to be clean around the fillerport.Contact with engine oil may result in the roughened skin. Care should be takenso as not to contact with engine oil wearing protective gloves and clothing.If contact, wash with soap and water thoroughly.When handling the engine oil, make sure to use the protective gloves at anytime.In case of contact, wash your hand or body with soap and water thoroughly.3.1.3 Engine coolant specificationsUse a Long Life Coolant (LLC) or an Extended Life Coolant (ELC) that meets or exceeds the following guidelinesand specifications.Alternative Engine CoolantIf an Extended or Long Life Coolant is not available, alternatively, you may use an ethylene glycol or propyleneglycol based conventional coolant (green).Notes:1. ALWAYS use a mix of coolant and water. NEVER use water only.2. Mix coolant and water per the mixing instructions on the coolant container.3. Water quality is important to coolant performance. ISUZU recommends that soft, distilled, or demineralizedwater be used to mix with coolants.4. NEVER mix extended or long life coolants and conventional (green) coolants.5. NEVER mix different types and / or colors of extended life coolants.6. Replace the coolant every 1000 engine hours or once a year.