INSTRUCTION MANUAL - Alessandri srl
INSTRUCTION MANUAL - Alessandri srl
INSTRUCTION MANUAL - Alessandri srl
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
60 ––––– 4. OPERATION <strong>INSTRUCTION</strong>S4.3.4 Restarting after starting failureWhen attempting to restart the engine after starting failure, be sure that the engine is at a complete stopbefore turning the key.IMPORTANT:• Do not turn the key to the START position when the engine is not completely stopped orduring operation. Otherwise, the starter motor pinion or ring gear will be damaged.• Wait at least 30 seconds before the second attempt to allow for battery voltage recovery.4.3.5 After the engine has startedAfter the engine has started, warm up the engine (refer to 4.3.2) and check the following points. If any abnormality,stop the engine and contact your dealer.• Alarm lamps and instruments• Water leak and oil leak from engine• Color of exhaust gas• Vibration or noise