INSTRUCTION MANUAL - Alessandri srl

40 ––––– 3. BEFORE YOU OPERATE3.3 Supplying Engine Oil(Refer to 3.1.2 Engine oil)Fill the oil pan with engine oil as specified level.1) When checking or filling / refilling the engine oil, placethe machine unit so that the engine is set on a level.2) Remove the filler cap (yellow colored) on the rockerarm cover or on the side of the engine.3) Fill with engine oil up to the upper limit on the dipstick.To check the oil level, insert the dipstick in fully.When checking the engine oil level with the dipstick,wait for about 3 minutes and then check the level as ittakes a little while for the engine oil supplied from thefiller port to fill the oil pan.4) Manually tighten the filler cap. Do not use a tool suchas pliers to tighten it. Excess tightening may cause todamage the filler cap.IMPORTANT:Do not overfill the oil pan with engine oil. Overfillingmay result in white exhaust smoke, suddenover engine speed or engine internaldamage, getting engine oil into the intake port.Be sure to keep the specified level betweenupper limit and lower limit on the dipstick.Upper limitLower limitDipstickFiller capFiller port(engine oil)