You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
RITTALRITTALRITTALRITTALRITTAL3. MountingThis chapter describes how to mount the AC drive.Before mounting it is recommended that the installation isplanned first.• Be sure that the AC drive suits the mounting location.• The mounting site must support the weight of the ACdrive.• Will the AC drive continuously withstand vibrationsand/or shocks?• Check ambient conditions, ratings, required cooling airflow, compatibility of the motor, etc.• Know how the AC drive will be lifted and transported.Lifting eyesA°3.1 Lifting instructionsThe easiest way to move or lift the equipment is to use thelifting eyes on top of the cabinet, see Fig. 7.When lifting, be carful not to damage the air outlets.Note: To prevent personal risks and any damage to theunit during lifting, it is advised to use the lifting eyes ontop of the equipment.Air outlet21Lifting eyeFig. 8Remove the roof unit and use the lifting eyes to liftsingle unit 600mm and 900mm.Single cabinet drives can be lifted/transported safely using theeyebolts supplied and lifting cables/chains as inillustration Fig. 8 above.Depending on the cable/chain angle A (in Fig. 8),following loads are permitted:Cable/chain angle APermitted load45 ° 4 800 N60 ° 6 400 N90 ° 13 600NRegarding lifting instructions for other cabinet sizes, pleasecontact <strong>Emotron</strong>.Fig. 7Use the lifting eyes.<strong>Emotron</strong> AB 01-5076-01r1 Mounting 13
Change language