Emotron VFX/FDU 2.0

More documents

Recommendations

Info

26 EMC and Machine Directive Emotron AB 01-5076-01r1
8. Operation via the Control PanelThis chapter describes how to use the control panel. Ifnothing else is mentioned, this information is valid for bothAFR and VSI.8.1 Control panelsThere are two control panels, one main panel in the Cabinetdoor controlling the completeEmotron VFXR/FDUL andone internal AFRpanel designated for service engineers.8.1.2Control panel for AFRInside the cabinet door you will find a second control panelfor the AFR unit, see Fig. 20. In this display you can observestaus, trips and set parameters. Normally you do not need todo any changes in this panel. This panel is designated for useby service engineers.8.1.1Main control panel forEmotron VFXR/FDULEmotron VFXR/FDUL is equiped with one main controlpanel on the cabinett door see Fig. 19. When we further inthis chapter describe how to use the control panel this is theone we are refering to.Fig. 20 Open the cabinet door to expose the AFRcontrol panelFig. 19 VXFR with control panel in front door.8.2 GeneralThe control panel in the front door displays the status of theEmotron VXFR and is used to set all the user parameters. Itis also possible to control the motor directly from thecontrol panel. The control panel can be built-in or locatedexternally via serial communication..NOTE: The VSI can run without the control panel beingconnected. However the settings must be such that allcontrol signals are set for external use.Emotron AB 01-5076-01r1 Operation via the Control Panel 27
Page 1: Emotron VFX/FDU 2.0AFE - Active Fro
Page 6 and 7: CondensationIf the active front end
Page 8: 2 Emotron AB 01-5076-01r1
Page 13 and 14: 2. General descriptionEmotron AFR i
Page 15 and 16: 2.2 Emotron AFR cabinet concept2.2.
Page 18 and 19: 12 General description Emotron AB 0
Page 20 and 21: 3.1.1 CoolingTable below shows the
Page 23 and 24: 5. Control Connections for Emotron
Page 25 and 26: RITTALRITTALRITTALRITTALRITTALRITTA
Page 27 and 28: 6. Getting StartedThis chapter is a
Page 29 and 30: Table 9Default parameter setup for
Page 31: 7. EMC and Machine Directive7.1 EMC
Page 35 and 36: 8.3.3 LED indicatorsThe symbols on
Page 37 and 38: 8.4 The menu structureThe menu stru
Page 39 and 40: 9. Functional Description for AFR u
Page 41 and 42: Reset Control [216]When the AFR is
Page 43 and 44: Reactive power [714]Displays the ac
Page 45 and 46: 9.8 System Data [900]Main menu for
Page 47 and 48: 9.9.3 Udc controller oparameters[O3
Page 49 and 50: 9.9.7 View control status [O90]Udc
Page 51 and 52: 10. Troubleshooting, Diagnoses and
Page 53 and 54: Table 18Trip condition, their possi
Page 55 and 56: 10.3 MaintenanceThe variable speed
Page 57 and 58: 11. Technical Data11.1 Electrical a
Page 59 and 60: Table 22 AFR69 typical output DC po
Page 61 and 62: 11.3 Operation at highertemperature
Page 64 and 65: DEFAULTCUSTOMDEFAULTCUSTOM615 CD Se
Page 66: Emotron AB, Mörsaregatan 12, SE-25

Emotron VFX/FDU 2.0

Create successful ePaper yourself

Delete template?

Save as template?