Rotary Seal Design Guide - Seals Unlimited

More documents

Recommendations

Info

V-Seals and ExcludersE ProfileCatalog EPS 5350/USAV-Seal ELarger cross-section. Accommodates ±0.5" axialmovement.Technical DataOperating Temperature RangeNBR: -40 to +225 °F (-40 to 107 °C)FKM: -30 to +325 °F (-34 to 163 °C)Shaft Surface SpeedUp to 1600 fpm (8.1 m/s)Maximum PressureN/AChoosing a SealSelect the larger V-Seal when the shaft diameter is on theboundary between two sizes.Part Number Nomenclature — E ProfileTable 12-5. V-Seal E Part Number NomenclatureV - 1 0 0 E N B RV = V-SealProfileE = V-Seal EMetric ShaftExample: 100 = 100 mmMaterial DescriptionExample: NBR = NitrileImportant: For full listings of standard sizes, see Appendix E.V-Seal E in Assembly121203/28/0612-8 Parker Hannifin CorporationEPS DivisionToll Free: (800) 233-3900www.parkerseals.com
V-Seals and ExcludersDS and SSW ProfilesCatalog EPS 5350/USADS ExcluderDesigned for internal deflection of heavy oil surges orexternal exclusion of dust or spray.The DS features the traditional Clipper nonmetalliccomposite construction for enhanced stability and optimalperformance.Technical DataDS ExcluderOperating Temperature RangeNBR: -20 to +250 °F (-29 to 121 °C)FKM: -40 to +400 °F (-40 to 204 °C)Shaft Surface SpeedUp to 2500 fpm (12.7 m/s)Maximum PressureN/AImportant: See Appendix B for size listing.SSW ExcluderSSW ExcluderSimilar to V-seals except they are press fit on shaft forheavy duty applications. Designed for applications forexternal washdowns or severe dusty environments. The sealrides against the face of the housing to keep contaminationfrom the primary seal. The SSW design features thetraditional Clipper nonmetallic composite construction forstability and optimal performance.Technical DataOperating Temperature RangeNBR: -20 to +250 °F (-29 to 121 °C)FKM: -40 to +400 °F (-40C to 204 °C)Shaft Surface SpeedThru 2500 fpm (12.7 m/s)Maximum PressureN/AImportant: See Appendix B for size listing.03/28/0612-9 Parker Hannifin CorporationEPS DivisionToll Free: (800) 233-3900www.parkerseals.com1212
Page 1 and 2:
Rotary Seal DesignGuideCatalog EPS
Page 3 and 4:
Rotary SealDesign GuideTable of Con
Page 5 and 6:
IntroductionCatalog EPS 5350/USA11T
Page 7 and 8:
Seal Decision TreeOil Retention, Sh
Page 9 and 10:
Clipper Oil Seal and Parker Oil Sea
Page 11 and 12:
Catalog EPS 5350/USAIntroduction1En
Page 13 and 14:
Sealing SystemsThe completeness of
Page 15 and 16:
EngineeringContentsRotary Shaft Sea
Page 17 and 18:
Catalog EPS 5350/USAEngineeringHow
Page 19 and 20:
Catalog EPS 5350/USAEngineeringThis
Page 21 and 22:
Catalog EPS 5350/USAEngineeringWhen
Page 23 and 24:
Catalog EPS 5350/USAEngineeringOthe
Page 25 and 26:
Catalog EPS 5350/USAEngineeringHous
Page 27 and 28:
Catalog EPS 5350/USAEngineering5. V
Page 29 and 30:
Catalog EPS 5350/USAEngineeringPTFE
Page 31 and 32:
Catalog EPS 5350/USAEngineeringCant
Page 33 and 34:
Catalog EPS 5350/USAEngineeringCata
Page 35 and 36:
Catalog EPS 5350/USAEngineeringShaf
Page 37 and 38:
Catalog EPS 5350/USAEngineeringFlex
Page 39 and 40:
Catalog EPS 5350/USAEngineeringShaf
Page 41 and 42:
Catalog EPS 5350/USAEngineeringBear
Page 43 and 44:
Catalog EPS 5350/USAEngineeringExce
Page 45 and 46:
MaterialsMaterials ExcellenceParker
Page 47 and 48:
Catalog EPS 5350/USAMaterialsCatalo
Page 49 and 50:
Product OfferingCatalog EPS 5350/US
Page 51 and 52:
Catalog EPS 5350/USAProduct Offerin
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Clipper ® Oil SealsIntroductionCon
Page 75 and 76:
Clipper ® Oil SealsEngineeringShaf
Page 77 and 78:
Clipper ® Oil SealsCatalog EPS 535
Page 79 and 80:
Page 81 and 82:
Clipper ® Oil SealsProduct Offerin
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Clipper ® Oil SealsLUPW, LPDW, LDS
Page 89 and 90:
Clipper ® Oil SealsOL ProfileCatal
Page 91 and 92:
Clipper ® Oil SealsTSS ProfileCata
Page 93 and 94:
Clipper ® Oil SealsRPDT ProfileCat
Page 95 and 96:
Clipper ® Oil SealsSS, SDS Profile
Page 97 and 98:
Clipper ® Oil SealsTMAL, TMAS Prof
Page 99 and 100:
Clipper ® Oil SealsRUP, RPD Profil
Page 101 and 102:
Page 103 and 104:
Parker Oil SealsIntroductionContent
Page 105 and 106:
Parker Oil SealsCatalog EPS 5350/US
Page 107 and 108:
Parker Oil SealsMaterialsCommon Mat
Page 109 and 110:
Page 111 and 112:
Parker Oil SealsProduct OfferingPar
Page 113 and 114:
Page 115 and 116:
Parker Oil SealsSpringless Grease R
Page 117 and 118:
Parker Oil SealsMedium Pressure Pro
Page 119 and 120:
Parker Oil SealsHigh Eccentricity S
Page 121 and 122:
Parker Oil SealsPTFE/Elastomer Prof
Page 123 and 124:
Shaft SleevesIntroductionContentsEn
Page 125 and 126:
Shaft SleevesMaterialsCommon Materi
Page 127 and 128:
ProTech Bearing IsolatorsIntroduct
Page 129 and 130:
ProTech Bearing IsolatorsCatalog EP
Page 131 and 132:
ProTech Bearing IsolatorsEngineeri
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150: ProTech Bearing IsolatorsLN Profil
Page 151 and 152: ProTech Bearing IsolatorsLW Profil
Page 153 and 154: ProTech Bearing IsolatorsSL Profil
Page 155 and 156: ProTech Bearing IsolatorsML Profil
Page 157 and 158: ProTech Bearing IsolatorsFS-360 Pr
Page 159 and 160: FlexiLip IntroductionContentsEngine
Page 161 and 162: FlexiLip EngineeringCatalog EPS 535
Page 163 and 164: FlexiLipCatalog EPS 5350/USAEnginee
Page 165 and 166: FlexiLipCatalog EPS 5350/USAMateria
Page 167 and 168: FlexiLip Product OfferingThe key ap
Page 169 and 170: FlexiLipCatalog EPS 5350/USAProduct
Page 171 and 172: FlexiCase IntroductionContentsEngin
Page 173 and 174: FlexiCase EngineeringChoosing the R
Page 175 and 176: FlexiCaseCatalog EPS 5350/USAEngine
Page 177 and 178: FlexiCase Product OfferingCatalog E
Page 179 and 180: FlexiCaseCatalog EPS 5350/USAProduc
Page 181 and 182: FlexiSeal ® RotaryIntroductionCont
Page 183 and 184: FlexiSeal ® RotaryCatalog EPS 5350
Page 185 and 186: FlexiSeal ® RotaryProduct Offering
Page 187 and 188: FlexiSeal ® RotaryCatalog EPS 5350
Page 189 and 190: FlexiSeal ® RotaryFC and FH Profil
Page 191 and 192: FlexiSeal ® RotaryFF Profiles —
Page 193 and 194: V-Seals and ExcludersIntroductionCa
Page 195 and 196: V-Seals and ExcludersMaterialsCatal
Page 197 and 198: V-Seals and ExcludersA ProfileCatal
Page 199: V-Seals and ExcludersL ProfileCatal
Page 203: Rotary SealDesign GuideAppendixDesi
Page 206 and 207: ACatalog EPS 5350/USADesign Action
Page 208 and 209: AACatalog EPS 5350/USANotesA-4 Park
Page 210 and 211: Catalog EPS 5350/USARotary Lip Seal
Page 250 and 251:
Catalog EPS 5350/USARotary Lip Seal
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
BBHigh Misalignment Inch1.000 to 3.
Page 296 and 297:
Catalog EPS 5350/USAHigh Misalignme
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Catalog EPS 5350/USAFlexiSeal ® In
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
FlexiSeal ® MetricCatalog EPS 5350
Page 332 and 333:
Catalog EPS 5350/USASolid to Split
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Catalog EPS 5350/USASleeve & V-Seal
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Catalog EPS 5350/USAProTech Sizes
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
ProTech Sizes Metric12.7 to 30.0Ca
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
RPM to FPM ConversionCatalog EPS 53
Page 404 and 405:
Pressure ConversionPSI / BARCatalog
Page 406 and 407:
Catalog EPS 5350/USAChemical Compat
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Catalog EPS 5350/USANotesHHH-18 Par
Page 424 and 425:
Catalog EPS 5350/USAOld to New Part
Page 426 and 427:
Catalog EPS 5350/USAOld to New Part
Page 428 and 429:
Catalog EPS 5350/USANotesIII-6 Park
Page 430 and 431:
Catalog EPS 5350/USAOther Parker EP
Page 432 and 433:
About Parker Hannifin CorporationCa
Page 434:
Parker Hannifin Corporation, Seal G
show all

Rotary Seal Design Guide - Seals Unlimited

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?