Rotary Seal Design Guide - Seals Unlimited

More documents

Recommendations

Info

Clipper ® Oil <strong>Seal</strong>sST-LUP, ST-LPD ProfilesCatalog EPS 5350/USAST-LUP and ST-LPD ProfilesST-LUP/ST-LPD — Spring-loaded single lip with heavyduty metal band inserted in composite OD. ST designfeatures metal bands for absorbing shock load and greaterbore retention. Spacer buttons are available for greasepurging in applications requiring back-to-back sealing.ApplicationFor heavy duty applications, work rolls, paper rolls,backup rolls and custom equipment.55Technical DataOperating Temperature RangeNBR: -20 to 250 °F (-29 to 121 °C)Shaft Surface SpeedUp to 3200 fpm (16.3 m/s)ST-LUP / ST-LPDMaximum Pressure0 to 7 psi (0 to 0.48 bar), depending on shaft speedSize RangeAvailable shaft diameter range is 4 to 65 inches (101 to1270 mm).ST-LUP with Button ProfilePart NumberingPart number is mold-specific with material used as the suffix.14872 STHIL5Important: For full listings of standard sizes, see AppendicesB and C.03/28/065-18 Parker Hannifin CorporationEPS DivisionToll Free: (800) 233-3900www.parkerseals.com
Clipper ® Oil <strong>Seal</strong>sTSS ProfileCatalog EPS 5350/USATSS ProfileTSS — Features nonmetallic composite OD for damagefreeinstallation. Soft flexible lip provides low friction sealingfriction sealing contact to give extended service life.ApplicationTypical applications: overhead cranes in steel mills, rotarydrilling crown and travel blocks, draglines, hoists andelevators. Also used on mine cart wheels, flywheels and idlerwheels.Technical DataOperating Temperature RangeNBR: -20 to 250 °F (-29 to 121 °C)FKM: -40 to 400 °F (-40 to 204 °C)55Shaft Surface SpeedUp to 2000 fpm (10.2 m/s)TSSMaximum Pressure0 psiSize Range1.274 to 17.500 inches (32.36 to 445 mm)Important: For full listings of standard sizes, see AppendicesB and C.Typical TSS Installation03/28/065-19 Parker Hannifin CorporationEPS DivisionToll Free: (800) 233-3900www.parkerseals.com
Page 1 and 2:
Rotary Seal DesignGuideCatalog EPS
Page 3 and 4:
Rotary SealDesign GuideTable of Con
Page 5 and 6:
IntroductionCatalog EPS 5350/USA11T
Page 7 and 8:
Seal Decision TreeOil Retention, Sh
Page 9 and 10:
Clipper Oil Seal and Parker Oil Sea
Page 11 and 12:
Catalog EPS 5350/USAIntroduction1En
Page 13 and 14:
Sealing SystemsThe completeness of
Page 15 and 16:
EngineeringContentsRotary Shaft Sea
Page 17 and 18:
Catalog EPS 5350/USAEngineeringHow
Page 19 and 20:
Catalog EPS 5350/USAEngineeringThis
Page 21 and 22:
Catalog EPS 5350/USAEngineeringWhen
Page 23 and 24:
Catalog EPS 5350/USAEngineeringOthe
Page 25 and 26:
Catalog EPS 5350/USAEngineeringHous
Page 27 and 28:
Catalog EPS 5350/USAEngineering5. V
Page 29 and 30:
Catalog EPS 5350/USAEngineeringPTFE
Page 31 and 32:
Catalog EPS 5350/USAEngineeringCant
Page 33 and 34:
Catalog EPS 5350/USAEngineeringCata
Page 35 and 36:
Catalog EPS 5350/USAEngineeringShaf
Page 37 and 38:
Catalog EPS 5350/USAEngineeringFlex
Page 39 and 40: Catalog EPS 5350/USAEngineeringShaf
Page 41 and 42: Catalog EPS 5350/USAEngineeringBear
Page 43 and 44: Catalog EPS 5350/USAEngineeringExce
Page 45 and 46: MaterialsMaterials ExcellenceParker
Page 47 and 48: Catalog EPS 5350/USAMaterialsCatalo
Page 49 and 50: Product OfferingCatalog EPS 5350/US
Page 51 and 52: Catalog EPS 5350/USAProduct Offerin
Page 73 and 74: Clipper ® Oil SealsIntroductionCon
Page 75 and 76: Clipper ® Oil SealsEngineeringShaf
Page 77 and 78: Clipper ® Oil SealsCatalog EPS 535
Page 81 and 82: Clipper ® Oil SealsProduct Offerin
Page 87 and 88: Clipper ® Oil SealsLUPW, LPDW, LDS
Page 89: Clipper ® Oil SealsOL ProfileCatal
Page 93 and 94: Clipper ® Oil SealsRPDT ProfileCat
Page 95 and 96: Clipper ® Oil SealsSS, SDS Profile
Page 97 and 98: Clipper ® Oil SealsTMAL, TMAS Prof
Page 99 and 100: Clipper ® Oil SealsRUP, RPD Profil
Page 103 and 104: Parker Oil SealsIntroductionContent
Page 105 and 106: Parker Oil SealsCatalog EPS 5350/US
Page 107 and 108: Parker Oil SealsMaterialsCommon Mat
Page 111 and 112: Parker Oil SealsProduct OfferingPar
Page 115 and 116: Parker Oil SealsSpringless Grease R
Page 117 and 118: Parker Oil SealsMedium Pressure Pro
Page 119 and 120: Parker Oil SealsHigh Eccentricity S
Page 121 and 122: Parker Oil SealsPTFE/Elastomer Prof
Page 123 and 124: Shaft SleevesIntroductionContentsEn
Page 125 and 126: Shaft SleevesMaterialsCommon Materi
Page 127 and 128: ProTech Bearing IsolatorsIntroduct
Page 129 and 130: ProTech Bearing IsolatorsCatalog EP
Page 131 and 132: ProTech Bearing IsolatorsEngineeri
Page 141 and 142:
ProTech Bearing IsolatorsCatalog EP
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
ProTech Bearing IsolatorsLN Profil
Page 151 and 152:
ProTech Bearing IsolatorsLW Profil
Page 153 and 154:
ProTech Bearing IsolatorsSL Profil
Page 155 and 156:
ProTech Bearing IsolatorsML Profil
Page 157 and 158:
ProTech Bearing IsolatorsFS-360 Pr
Page 159 and 160:
FlexiLip IntroductionContentsEngine
Page 161 and 162:
FlexiLip EngineeringCatalog EPS 535
Page 163 and 164:
FlexiLipCatalog EPS 5350/USAEnginee
Page 165 and 166:
FlexiLipCatalog EPS 5350/USAMateria
Page 167 and 168:
FlexiLip Product OfferingThe key ap
Page 169 and 170:
FlexiLipCatalog EPS 5350/USAProduct
Page 171 and 172:
FlexiCase IntroductionContentsEngin
Page 173 and 174:
FlexiCase EngineeringChoosing the R
Page 175 and 176:
FlexiCaseCatalog EPS 5350/USAEngine
Page 177 and 178:
FlexiCase Product OfferingCatalog E
Page 179 and 180:
FlexiCaseCatalog EPS 5350/USAProduc
Page 181 and 182:
FlexiSeal ® RotaryIntroductionCont
Page 183 and 184:
FlexiSeal ® RotaryCatalog EPS 5350
Page 185 and 186:
FlexiSeal ® RotaryProduct Offering
Page 187 and 188:
FlexiSeal ® RotaryCatalog EPS 5350
Page 189 and 190:
FlexiSeal ® RotaryFC and FH Profil
Page 191 and 192:
FlexiSeal ® RotaryFF Profiles —
Page 193 and 194:
V-Seals and ExcludersIntroductionCa
Page 195 and 196:
V-Seals and ExcludersMaterialsCatal
Page 197 and 198:
V-Seals and ExcludersA ProfileCatal
Page 199 and 200:
V-Seals and ExcludersL ProfileCatal
Page 201 and 202:
V-Seals and ExcludersDS and SSW Pro
Page 203:
Rotary SealDesign GuideAppendixDesi
Page 206 and 207:
ACatalog EPS 5350/USADesign Action
Page 208 and 209:
AACatalog EPS 5350/USANotesA-4 Park
Page 210 and 211:
Catalog EPS 5350/USARotary Lip Seal
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
BBHigh Misalignment Inch1.000 to 3.
Page 296 and 297:
Catalog EPS 5350/USAHigh Misalignme
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Catalog EPS 5350/USAFlexiSeal ® In
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
FlexiSeal ® MetricCatalog EPS 5350
Page 332 and 333:
Catalog EPS 5350/USASolid to Split
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Catalog EPS 5350/USASleeve & V-Seal
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Catalog EPS 5350/USAProTech Sizes
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
ProTech Sizes Metric12.7 to 30.0Ca
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
RPM to FPM ConversionCatalog EPS 53
Page 404 and 405:
Pressure ConversionPSI / BARCatalog
Page 406 and 407:
Catalog EPS 5350/USAChemical Compat
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Catalog EPS 5350/USANotesHHH-18 Par
Page 424 and 425:
Catalog EPS 5350/USAOld to New Part
Page 426 and 427:
Catalog EPS 5350/USAOld to New Part
Page 428 and 429:
Catalog EPS 5350/USANotesIII-6 Park
Page 430 and 431:
Catalog EPS 5350/USAOther Parker EP
Page 432 and 433:
About Parker Hannifin CorporationCa
Page 434:
Parker Hannifin Corporation, Seal G
show all

Rotary Seal Design Guide - Seals Unlimited

Create successful ePaper yourself

Delete template?

Save as template?