EKSpot MALDI Spotter System Operator Guide - Eksigent
EKSpot MALDI Spotter System Operator Guide - Eksigent
EKSpot MALDI Spotter System Operator Guide - Eksigent
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configure the Software and Initialize the <strong>System</strong>3. Click Run Manager.The Run Manager window appears (Figure 4-2).Figure 4-2<strong>Eksigent</strong> control software—Run Manager window4. Select Devices > <strong>Spotter</strong> Type > ekspot.This initializes the spotter and the matrix addition syringe pump.Note: If there is a communication error between the LC and the spotter, awarning dialog indicating the nature of the problem is presented (Figures4-3 through 4-5). It is necessary to remedy the situation before continuing.Figure 4-3Communication Failure dialogFigure 4-4Error Warning dialog<strong>EKSpot</strong> <strong>MALDI</strong> <strong>Spotter</strong> <strong>System</strong><strong>Operator</strong> <strong>Guide</strong>16 of 38 September 2012