EKSpot MALDI Spotter System Operator Guide - Eksigent

Configure the Software and Initialize the System14. Click the Valve tab and select Int. Three Port in the Valve Type field (Figure 4-10).Figure 4-10 Syringe Pump Configuration Dialog—Valve tab15. Select 1 for the Initialization Port.16. Type the following in the Valve Port Naming area:• For Port #1, type Matrix• For Port #2, type Spotter• For Port #3, type Waste17. Click OK to return to the ekspot Configuration dialog and re-initialize the pump.Figure 4-11 Initializing matrix addition syringe pump dialog18. If the pump won’t initialize, close the Run Manager window.EKSpot MALDI Spotter SystemOperator Guide20 of 38 September 2012