For FARGO Pro and Pro-L ID Card Printers User's Manual

More documents

Recommendations

Info

5. Click on the SmartGuard button to display theSmartGuard options.6. Click on the Enable/Disable button. The Passwordwindow appears.7. Enter your current password into the Enter CurrentPassword box.8. Once the password is entered, confirm the password bytyping it again in the Confirm Password box.9. Select the Disable SmartGuard Security Feature option.10. Click on the OK button to disable SmartGuard. TheSmartGuard software will indicate when encoding iscomplete and will prompt you to check the printerÕs LCDDisplay to verify encoding was successful.12 Using SmartGuard
11. If encoding was successful, the message ÒKey DisabledÓwill appear on the printerÕs LCD Display indicating thatSmartGuard is now disabled. Click on the OK button tocomplete the disabling process. The printer can now beoperated without an access card. If encoding wasunsuccessful, an error message will appear on the printerÕsLCD Display indicating the specific problem. See Chapter 5for a list of SmartGuard related LCD error messages.Correct the problem, then click on the softwareÕs Cancelbutton to return to the Password window and resend thedisable command.Using SmartGuard 13
Page 1 and 2: ®981106-510299-(02)ELECTRONICS, IN
Page 3: Table of ContentsChapter 1: Getting
Page 6 and 7: 2. If your printer(s) is stolen, it
Page 8 and 9: 3. Double-click on the Add/Remove P
Page 10 and 11: 3. Open the SmartGuard software by
Page 12 and 13: 11. Finally, click on the Password
Page 14 and 15: 7. Click on the Change button. The
Page 18 and 19: Chapter 3: Using SmartShieldI. ABOU
Page 20 and 21: Rotate ButtonThis button allows you
Page 22 and 23: II. CREATING SMARTSHIELD SECURITY I
Page 24 and 25: 3. Open the SmartGuard software by
Page 26 and 27: the orientation of the security ima
Page 28 and 29: IV. PRINTING AND VIEWING SMARTSHIEL
Page 30 and 31: 6. Click on the Card Options button
Page 32 and 33: 9. Once the printer receives the da
Page 34 and 35: 10. If deletion was successful, the
Page 36 and 37: Message Cause SolutionInvalid Shiel
Page 40: FARGO Electronics, Incorporated Pri

For FARGO Pro and Pro-L ID Card Printers User's Manual

Create successful ePaper yourself

Delete template?

Save as template?