TotalPac®2 Dry - FIREFLEX SYSTEMS

TOTALPAC2 Page 1 of 12TOTALPAC2 Integrated Fire Protection SystemSystem design & Dimensional Data1- Skid mounted UnitThe TOTALPAC2 unit skid is made of sturdy 14 gauge steel,measuring 36" x 20" x 6" (91,4 x 50,8 x 15,2 cm) for 1½", 2"& 3" systems and 46" x 24" x 6" (116,8 x 61 x 15,2 cm) for 4"& 6" systems (refer to Figures 1 to 5 for dimensions).All surfaces are rust proof coated, inside and outside, withfire red, oven baked polyester powder on phosphate base.IMPORTANT! The TOTALPAC2 skid units are NOT designedto be installed where they will be subjected to outdoorsand/or freezing conditions. Refer to environmental data foradditional details. Subjecting the unit to conditions outsidethese limitations might hamper the normal operation of thesystem.System Size(Dia.)Shipping weightsLbs.PREACTIONKg.1½" 285 1922" 310 1413" 440 2004" 510 2316" 710 322Note: Above Shipping Weights are nominal and will changedepending on configuration and options selected.The skid assembly is pre-assembled and factory testedunder ISO-9001 conditions (refer to following figures forinstallation and clearances details).Note: This skid unit contains only the mechanical section ofthe TOTALPAC2 trim. Electrical connections, control paneland air supply when applicable are provided by others.Multiple unit installations are easily achieved by manifoldingunits together at their water inlets but drains shall remainseparate and open. Refer to Figure 4 & 5 for additionaldetails on how to pipe the drains.FM-086G-0-48C