chapter 9 advanced features.pdf - Audio Intervisual Design, Inc.

More documents

Recommendations

Info

Advanced FeaturesMicro Lynx Setup<strong>Audio</strong> Clock Generator SetupThe AES/EBU <strong>Audio</strong> Clock Generator produces a digital audio bitstream locked to the Micro Lynx system reference. Thisinformation is used by the SGI workstation to control the playspeed of the digital audio.Set the desired sample rate using the Nominal S/Rate Out sectionof the SETUP ACG Menu. When Mediasound is in Chase mode, itautomatically detects and adjusts to this setting.On the Micro Lynx Keyboard press the [SETUP] key followed bythe [ACG] key. These two keys are next to each other in the topleft corner of the keyboard. Pressing [SETUP] puts the MicroLynx into setup mode, which is used to configure the system. The[Last/Next] keys are used to step through setup options and the[+/-] keys are used to select the required parameters.Note: In the following instructions, it is not necessary to exitsetup mode after each step.ProcedureSet the system sample rate.1. [SETUP], [ACG]2. [+/-]Setup: ACG OptionsSelection: NOM S/Rate Out 44.100 ks/sYou are in the ACG Setup Menu.Use to select the correct sample rate.3. [SETUP]Exit Setup mode.Set the ACG variable rate output option to Off.Procedure1. [SETUP], [ACG]Setup: ACG OptionsSelection: NOM S/Rate Out 44.100 ks/sSelect ACG setup.Micro Lynx9-20 06/22/00
Advanced Features2. [Last]/[Next]3. [+/-]Setup: ACG OptionsSelection: Var Ratio Out: OffUse to turn Variable Ratio Output off.4. [SETUP]Exit Setup mode.MIDI Time Code SetupThe Micro Lynx generates MIDI time code (MTC), which is usedby Mediasound for positional synchronization. MTC can betransmitted from either the Micro Lynx MAC or MIDI I/F ports.Set the appropriate MIDI port to Output MTC.Procedure1. [SETUP], [MIDI]Setup: MIDISelection: MIDI OUT Jack: MTCSelect MIDI port setup.2. [Last]/[Next]3. [Last]/[Next]4. [+/-]Setup: MIDISelection: I/F Out Jack: MTCSetup: MIDISelection: MAC OUT Jack: MTCSelect the port you wish to use for MTC.Use to select MTC as the MIDI output.5. [SETUP]Exit Setup mode.Micro Lynx06/22/00 9-21
Page 1 and 2: Chapter 9 Advanced FeaturesUsing AV
Page 3 and 4: Advanced Features9. Press the [SETU
Page 5 and 6: Advanced FeaturesSystem Set Up And
Page 7 and 8: Advanced Features5. Set the system
Page 9 and 10: Advanced FeaturesSystem Setup And C
Page 11 and 12: Advanced FeaturesAdvanced MIDI Feat
Page 13 and 14: Advanced FeaturesMIDI DATA SRCSWITC
Page 15 and 16: Advanced FeaturesUsing Mediasound w
Page 17 and 18: Advanced Features! If the Micro Lyn
Page 19: SETUPSYS TRAN EVNTLOCKBUSYRECLOCKBU
Page 23 and 24: Advanced FeaturesProcedure1. [SETUP
Page 25 and 26: Advanced FeaturesControlling One Tr

chapter 9 advanced features.pdf - Audio Intervisual Design, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?