Preliminary Programme - FISITA 2010 World Automotive Congress

Technical Programme - Monday, 31 May 2010
Dr. Joseph Burton, Burton &
Associates
Mr. Todd Saczalski, T.K.S.
Reconstruction, UNITED STATES
16:30 - 18:30
E3-3 : Intelligent Transportation
Systems
F2010E064
Faster to Vision Zero Via Santayana:
The Recessionary Evidence
Mr. Al Gullon, ACEs, CANADA
F2010E071
Distributed Urban Road Traffic
Control with Vehicle Priority
Management
Mr. Tamas Tettamanti, Budapest
Unversity of Technology and
Economics
Mr. Istvan Varga, Computer and
Automation Research Institute,
HUNGARY
F2010A043
Development of Ecological
Driving System Using Model
Based Prediction of Traffics and
Information of Road Shapes
Dr. Md Abdus Samad Kamal, Fukuoka
Industry, Science and Technology
Foundation,
Mr. Masakazu Mukai, Mr. Junichi
Murata, Mr. Taketoshi Kawabe,
Kyushu University, JAPAN
F2010B088
Vehicular Management System
Mr. Suk-Hyun Seo, Sungkyunkwan
University, KOREA
16:30 - 18:30
F1-3 : Buses
F2010F026
Accessory Loads on a Parallel
Electric Hybrid City Bus
Mr. Jeffrey Campbell, Dr. David
Kittelson, University of Minnesota,
UNITED STATES
F2010A120
Quantification of the Environmental
Impact in the City of Madrid
Depending on Technical Measures
Applied to Bus Fleet.
Dr. José María López Martínez ,
Felipe Jiménez Alonso, Francisco
Aparicio Izquierdo, Nuria Flores
Holgado, Javier Páez Ayuso, Santiago
Tapia Fernández, INSIA (University
¡-stop and think
With stop-start in the new M{zd{ 3
Institute for Automobile Research).
Polytechnic University of Madrid,
SPAIN
F2010C049
CAE Based Certification for
Safety Regulations: Bus Rollover -
A Case Study
Mr. Anil Kumar Chigullapalli,
Tata Technologies Ltd.
Mr. S. Raju, Mr. Anil Mannikar,
Mr. Rahul Mahajan, The Automotive
Research Association of India, INDIA
F2010G009
Virtual Techniques for Bus Roof
Strength Test, the Conditions of
VT Application
Dr. Sándor Vincze-Pap, JAFI-AUTOKUT
Engineering Ltd.
Mr. András Csiszár, Meshining
Engineering Ltd., HUNGARY
16:30 - 18:30
H-3 : Efficient Production and
Operation of Vehicles and
Components
F2010H009
Research on the User’s Costs in
Motor Vehicles Life Cycle
19
Ms. Kristina Jakimovska, Mr. Todor
Davcev, Mr. Igor Gjurkov, “SS. Cyril
and Methodius” University, FORMER
YUGOSLAV REPUBLIC OF MACEDONIA
F2010H018
Metallurgical Design and Fatigue
Endurance of TS 780 MPa Grade
ERW Steel Tube for Automotive
Suspension Parts
Mr. Shunsuke Toyoda, Mr. Yoshikazu
Kawabata, Dr. Saiji Matsuoka,
Mr. Akio Sato, JFE Steel Corporation,
JAPAN
F2010H019
Integration of a Honing Tool into
a Combination Machining Centre
Mr. Kai-Uwe Paffrath, Technische
Universität Dortmund
Prof. Dr.-Ing. Dirk Biermann, Institute
for Machining Technology, GERMANY
F2010H022
Production Planning and Control
with a Discrete lot Sizing and a
Rolling Horizon
Dr. Andre Döring, Prof. Dr.-Ing.
Wilhelm Dangelmaier, Mr. Bastian
Degener, University of Paderborn,
GERMANY
We’ve given serious thought to the impact we make on the environment. That’s why the new Mazda 3 comes equipped with i-stop – an innovative start-stop
system that not only cuts emissions, but lowers fuel consumption as well. So that you can make your mark on those around you, but not on the environment.
The new M{zd{ 3 m{zd{.com