Web Security Deployment Guide (PDF) - Websense

General Deployment RecommendationsSupported integrationsWebsense software can be integrated with the following firewalls, proxy servers, andcaching applications (collectively referred to as integration products) to provideInternet filtering.Table 9 Supported IntegrationsIntegration Version Supported CommentsCisco® • Cisco PIX Firewall Softwarev5.0 or greater• Cisco Adaptive SecurityAppliances (ASA) Softwarev7.0 or greater• Cisco Content Engine ACNSv5.4 or greater• Cisco Routers with Cisco IOSSoftware Release 12.3 orgreaterCheck Point® • FireWall-1 FP1 or greater• FireWall-1 NG AI• FireWall-1 NGX• CheckPoint Edge• CheckPoint R61• Check Point R65Contact Check Point forassistance is determiningwhich FireWall-1 version isrunning.Network Agent can run onsame machine only if it andthe integration each has itsown processor.Citrix®– CitrixPresentationServer– MetaFrame®PresentationServerMicrosoft® InternetSecurity andAcceleration (ISA)ServerNetwork ApplianceNetCache®• MetaFrame PresentationServer 3.0• Citrix PresentationServer 4.0• Citrix PresentationServer 4.5Integrations:• Microsoft ISA Server 2004,Standard Edition andEnterprise Edition• Microsoft ISA Server 2006,Standard Edition andEnterprise EditionClients:• ISA Firewall Clients• Secure NAT Clients• NetCache OS v5.2.1 R1D4 orgreater.Websense Plug-in:The Citrix plug-in is onlysupported on Windows.Requires either:• Microsoft WindowsServer 2003 (32 bit)• Microsoft Windows 2000Server (32 bit)Websense Plug-in:The ISAPI Plug-in for theMicrosoft ISA Server issupported only on Windows.Websense protocolmanagement requiresNetCache v5.5 or later.44 Websense Web Security and Websense Web Filter