Web Security Deployment Guide (PDF) - Websense

Deploying Network AgentSingle segment networkA single segment network is a series of logically connected nodes (computers,printers, and so on) operating in the same portion of the network. In a single segmentnetwork, Filtering Service and Network Agent must be positioned to monitor Internettraffic across the entire network.Figure 2 shows the filtering components of the Websense software Stand-AloneEdition installed in a central location to see both HTTP and non-HTTP traffic.Figure 2 Websense software in a single-segment networkTo learn more about installing Network Agent in a network: With a hub, see Hub configuration, page 54. With a switch, see Switched networks with a single Network Agent, page 55. With a gateway, see Gateway configuration, page 59.50 Websense Web Security and Websense Web Filter