LPS Instruction Manual - HygroMatik

3. Transport3.1 General informationNote: Take care when transporting the HygroMatik LPS nozzlesystem to prevent the device and packaging from being damagedby impact or accidental loading or unloading.3.2 PackagingNote: The HygroMatik LPS nozzle system is delivered on a pallet.3.3 Temporary storageStore the material in a clean dry place. The storage temperatureshould be 0-40°C.Note: Only clean components may be installed in a ventilationduct.3.4 Inspecting for correctness and completenessWhen you receive the goods, ensure that:• the equipment is complete and all parts are in perfectcondition.Note: Any transport damages and/or missing parts must be reportedimmediately to the shipper or supplier.The periods in which notification of the transport company mustoccur for the purposes of identifying the damage are as follows*:Transport companyPostRailRail and road transportcompaniesParcel services* Periods are subject to change without notice.3.5 Scope of deliveryTime after receipt ofgoodsno later than 24 hours7 days at the latest4 days at the latestimmediatelyThe following items are included in the delivery:• vortex modules• droplet separators (optional; Hygiene compliancechecks applies only to systems with droplet separators)• pump station• operating instructions for the system• bushing/s for ductNote: Hoses and nozzles are delivered at the time of start-up.Page 10