LPS Instruction Manual - HygroMatik

1.3 Intended useThe HygroMatik LPS nozzle system is used for air humidificationand cooling with desalinated water having a conductivity of 5-20µS/cm. The feed water should have a temperature of 5-15°C.Caution: Proper use includes fulfilment of the assembly, disassembly,reassembly, start-up, operating and maintenance conditionsspecified by us as well as disposal measures.Only appointed qualified staff may work on or with the system.Persons transporting or working on or with the system musthave read and understood the relevant parts of this operatingmanual, particularly the 'Safety instructions' section. Staff mustalso be informed of possible hazards by the operating company.Please keep a copy of the operating manual at the locationwhere the device is being used.The HygroMatik LPS nozzle system is not frost-proofed and notsuitable for outdoor installation.The room temperature should be between 5 and 40°C.At an altitude of over 1000 meters please contact your HygroMatikdealer or HygroMatik for details.Applications:The HygroMatik LPS nozzle system has a wide range of applications.These systems are used wherever low-energy adiabatichumidification or cooling or systems with high-precision controlare needed. They can be found in such places as offices, storerooms,production halls, clean rooms, hospitals and concerthalls.Note: Components installed in ventilation and air-conditioningsystems must be suitable for the intended use; i.e. they must becorrosion-resistant, easy to clean, accessible and hygienic. Furthermore,they must not facilitate growth of micro-organisms.Improper use:Hardware and software may not be modified.Page 6